$79.99
204 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
SB Tactical basically invented the pistol stabilizing brace category, and the SBA5 is where their A-series really hits its stride. It slots right between the lightweight SBA3 and the beefier SBA4, giving you a reinforced polymer build that cuts down on flex without turning your compact pistol into a boat anchor. At just 9 ounces, it adds real support and a steadier point of contact while keeping your footprint clean and manageable.
The five-position adjustment is the heart of it. You can dial the length to match your reach, your gear, or whoever else is running the gun, and the detents lock in with a positive click every time. The arm cuff carries over the geometry from the original SB15, so it wraps comfortably and gives you that extra contact point that makes a real difference when you're trying to keep things tight. The included 1-inch adjustable nylon strap lets you snug the fit to your forearm or leave it loose, your call.
This brace works with any platform that accepts a mil-spec carbine receiver extension, which covers the vast majority of AR pistol builds out there. Worth noting the receiver extension itself is not included, so if you're starting from scratch you'll want a mil-spec tube to go with it. Keep in mind buffer tubes vary a hair between manufacturers, so fit can feel slightly different depending on what you're running. The integral ambidextrous QD sling socket is a nice touch too, letting you rig a sling on either side with no extra hardware bolted on.
Measurements come in at 6.2 inches for the brace body, 7.5 inches collapsed, and 10.25 inches fully extended, with a max width around 2.1 inches. The Ranger Green polymer pairs cleanly with earth-tone and green-themed builds and holds up to the kind of handling a working pistol sees. Made in the USA and designed by U.S. veterans, it's a proven, no-nonsense piece that earns its spot on a lot of builds.
No, the receiver extension is not included with the SBA5. It's designed to fit any platform that accepts a mil-spec carbine receiver extension, so you'll need to supply your own mil-spec tube if you don't already have one on your build. Since tubes can vary slightly between makers, fit may feel a touch different depending on which one you use.
The SBA5 sits right in the middle of the lineup. The SBA3 is the lightest and slimmest, the SBA4 is the most reinforced and rigid, and the SBA5 blends the two with a reinforced build that keeps a compact footprint. If you want more support than the SBA3 without the bulk of the SBA4, the SBA5 is the sweet spot.
Yes, the SBA5 offers five adjustable positions so you can set the length to match your reach or shooting setup. It also has an integral ambidextrous QD sling socket built right in, letting you run a push-button QD sling swivel on either side without adding extra hardware.
This model is finished in Ranger Green and built from reinforced polymer that stands up to regular use. The green colorway pairs nicely with earth-tone and OD-themed builds. It weighs about 9 ounces, so it adds support without weighing down your pistol.
| UPC | 699618782554 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SBA5X07SB |
You must be logged in to post a review.
Reviews
There are no reviews yet.