Description
Every ounce and every fraction of an inch matters on a suppressed gun, and that's exactly why JK Armament built the LT Flash Reducer end cap the way they did. This is the shortest, flattest cap in their lineup, and it comes standard on most JK cans for good reason. It adds next to nothing in length or weight, and the three small concave channels machined around the bore opening knock down some of the muzzle flash that would otherwise sneak past the front of your suppressor. It looks clean doing it too, which never hurts.
Built Light in T6-7075 Aluminum
The LT designation means this cap is machined from T6-7075 billet aluminum, the strongest of the common aluminum alloys and a smart choice when you want to keep weight off the muzzle. A Type 3 hard black anodized finish gives it real wear and corrosion resistance, so it holds up to solvent, carbon, and regular thread cycling. If you'd rather have titanium, JK offers this same design in their PRO line, but for most setups the aluminum version does the job at a fraction of the weight and cost.
Swapping the 45 Cal End Cap Is Painless
JK built their 105 and 155 series suppressors around a mission configurable idea, and the swappable end cap is a big part of that. The 1-1/2 inch wrench flats mean a standard wrench gets it on and off with no proprietary tools. This version has a .45 caliber bore, so it pairs with 45 ACP hosts and other .45 cal builds on a JK 155 platform. Keep in mind the bore size is your ceiling, so you can run smaller calibers through it in a pinch, but you give up a little performance versus a properly matched cap.
A Worthwhile Spare for Your JK 155
Whether you're replacing a cap, setting up a second configuration, or just want a spare in the range bag, this is an easy add. It's American made, and JK backs their parts with a lifetime guarantee, which tells you plenty about how they build things.
Key Specifications
- Manufacturer: JK Armament
- Model: LT Flash Reducer End Cap
- Manufacturer Part Number: JK155LTEC45
- UPC: 850038425517
- Bore Caliber: .45 Cal
- Compatibility: JK Armament 155 series suppressors
- Material: T6-7075 billet aluminum
- Finish: Type 3 hard anodized, black
- Style: Flat flash reducer with three concave channels
- Wrench Flats: 1-1/2 inch, no special tools needed
- Country of Origin: USA
What’s Included
- JK Armament LT Flash Reducer End Cap, 45 Cal
Frequently Asked Questions
Will the LT Flash Reducer End Cap fit my JK Armament suppressor?
This cap is made for the JK 155 series, which uses swappable front caps as part of JK's mission configurable design. It threads onto JK 155 platform cans and swaps out with a standard wrench using the 1-1/2 inch flats. If you're running a 105 series can, you'll want the 105-sized cap instead.
Can I shoot smaller calibers through this 45 cal end cap?
Yes. The bore diameter is the maximum caliber you can send through it, so 9mm, 300 BLK, and other smaller rounds will pass through a .45 cal cap just fine. You lose a bit of suppression performance compared to a caliber-matched cap since more gas escapes around the bullet, but it works well for multi-caliber setups.
How much flash reduction does the LT Flash Reducer provide?
It's the minimalist option in JK's end cap lineup. The three small concave channels around the bore knock down a modest amount of muzzle flash while keeping the cap as short and light as possible. If flash signature is your top priority, JK's pronged Flash Hider end cap does more in that department at the cost of some added length.
What's the difference between the LT and PRO versions of this end cap?
The LT is machined from T6-7075 billet aluminum, making it the lighter and more affordable of the two. The PRO version is cut from 6AL-4V titanium for maximum durability under hard use. For most pistol and general-purpose hosts, the LT aluminum cap is plenty tough and keeps weight off the end of the can.




Reviews
There are no reviews yet.