Description
The Leapers UTG PRO TLUFS55 is a flip-up front sight built to clamp right onto a Picatinny or Weaver rail and ride along until your optic needs backup. It runs a standard elevation-adjustable A2 front sight post, so anyone who has zeroed an AR before will feel right at home turning it in to dial your point of impact. Fold it down and it sits at a low 0.5 inch stowed height, tucking under most optics without crowding your sight picture or snagging on gear.
What Sets the TLUFS55 Apart
This one is CNC machined from 6061-T6 aluminum with reinforced steel components and finished in a tough matte black anodize. The whole package weighs in at just 1.3 ounces, so it disappears on the rail without adding noticeable weight to your setup. It is proudly designed and made in the USA and backed by the UTG PRO limited lifetime warranty, which says something about how they expect it to hold up.
How the UTG PRO Front Sight Deploys
The sight tower flips up manually and locks into place when deployed, then unlocks with a spring-loaded push button when you want it back down. That positive lock is the whole point of a good backup sight, since it means the tower won't get knocked flat when you bump a doorway, a barricade, or the truck seat. When it comes time to mount it, Leapers recommends snugging the side plate screw to around 25 in-lbs for a secure hold.
Pairing the TLUFS55 for a Full Set
Since the front post follows the standard A2 pattern, you can swap in fiber optic or tritium posts down the road if you want a brighter aiming point. It's designed to pair with the matching TLURS55 flip-up rear sight for a complete same-plane iron sight setup on your flat-top AR or other long gun. Run it as your primary irons or as a fail-safe behind a red dot, and it does the job either way.
Key Specifications
- Manufacturer: Leapers UTG PRO
- Manufacturer Part Number: TLUFS55
- Model: UTG PRO
- UPC: 4717385556676
- Sight Type: Flip-Up Front Sight
- Front Sight Post: Standard Elevation-Adjustable A2
- Rail Fit: Picatinny / Weaver
- Material: CNC Machined 6061-T6 Aluminum with Reinforced Steel
- Finish: Matte Black Anodized
- Color: Black
- Weight: 1.3 oz
- Stowed Height: 0.5 in
- Deployment: Manual Flip-Up, Spring-Loaded Push Button Release
- Country of Origin: Made in USA
- Warranty: UTG PRO Limited Lifetime
What’s Included
- UTG PRO TLUFS55 flip-up front sight
- Picatinny mounting deck and bolt
Frequently Asked Questions
Will the TLUFS55 co-witness with the matching UTG PRO rear sight?
Yes, it's built to run on the same plane as the TLURS55 UTG PRO flip-up rear sight for a matched iron sight setup. Mount both on your flat-top upper and handguard rails at the correct spacing and you'll have a proper sight picture. Running the two together is the easiest way to get a complete set that lines up right out of the gate.
Can I replace the front sight post on the TLUFS55?
The post follows the standard A2 pattern, so you can swap in aftermarket fiber optic or tritium posts if you want a more visible aiming point. This is a common upgrade for folks who shoot in low light or just prefer a brighter dot up front. Elevation adjustment on the stock post works the same way you'd zero any A2-style sight.
Does the flip-up front sight stay locked when deployed?
It does. The sight tower locks into place when you raise it and only drops back down when you hit the spring-loaded push button. That means it won't get knocked flat against a doorway, barricade, or the inside of a case, which is exactly what you want from a backup sight.
What rails does the UTG PRO front sight fit?
It's designed to clamp onto standard Picatinny and Weaver-style rails, making it a great fit for flat-top ARs and other long guns with a top rail. Leapers suggests torquing the side plate screw to about 25 in-lbs for a secure, repeatable hold. At just 1.3 ounces it adds almost nothing to your rifle's weight.





Reviews
There are no reviews yet.