$250.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Big fifties are a blast to shoot, but they beat you up and kick dust everywhere without a good brake up front. The KGM R50T Taper Muzzle Brake handles that job while doing something most brakes can't: it doubles as the mounting foundation for KGM's R50T suppressor. This version is cut with M24x1 threads, the pattern used on Accuracy International .50 BMG rifles like the AX50, so if that's what sits in your safe, this is the one to grab.
KGM built this brake around a taper-lock interface, which is the right call for a cartridge that generates as much pressure and violence as the .50 BMG. Instead of relying on threads alone, the tapered shoulder pulls the suppressor into solid, repeatable contact every time you spin it on. That means consistent alignment, less wear on the mount over thousands of rounds, and a point of impact that stays put when you swap the can on and off. Even if a suppressor is somewhere down the road for you, running the brake now means your barrel is already set up for it when the time comes.
The brake is machined from steel and treated with a black nitride finish, a surface hardening process that resists heat, carbon buildup, and corrosion far better than paint or basic bluing. Nitride goes into the metal rather than sitting on top of it, so it holds up to the blast and muzzle flash a fifty dishes out session after session. As a standalone brake, it takes real bite out of recoil and helps keep that big rifle settled so you can spot your own impacts.
This is the same taper mount KGM ships with its R50T big-bore suppressor, which handles .50 BMG along with .416 Barrett and the .408 and .375 CheyTac family. Buy this brake for a second rifle and one can covers your whole big-bore lineup. Verify your muzzle threads are M24x1 before ordering, and you're set.
The M24x1 thread pattern is used by Accuracy International .50 BMG rifles such as the AX50. KGM offers this same brake in other patterns too, including 1×14 for Cadex, McMillan, Serbu, and Armalite, plus 7/8×14 for Barrett, so double check your barrel threads before ordering. If your muzzle is threaded M24x1, this is the right one.
Yes, that is a big part of its purpose. It uses KGM's taper-lock interface, the same mounting system the R50T suppressor attaches to. The tapered shoulder gives the can a secure, repeatable lockup that helps with alignment consistency and extends the service life of the mount.
Absolutely. It functions as a standalone muzzle brake and does a solid job cutting the stout recoil a .50 BMG generates, making long range sessions a lot more comfortable. Adding the suppressor later is as simple as spinning it onto the taper mount you already have installed.
Black nitride is a surface hardening treatment that penetrates the steel rather than coating it, so it stands up well to the extreme heat, pressure, and carbon a fifty produces at the muzzle. It also adds strong corrosion resistance, which matters on a part that lives at the dirtiest end of the rifle. Routine cleaning is all it should need.
| UPC | 784668807170 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | A-TMB50-S-3 |
| Model | |
| Thread Pattern | M24x1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.