Description
Running one suppressor across several rifles is the smart way to do it, but only if swapping hosts takes seconds instead of a torque wrench session. That is exactly what this mount handles. The A-QD-FH-S-3M threads onto 3/4×24 barrels, the SR25 spec pattern common on large-frame ARs and plenty of big-bore precision builds, and once it is installed your KGM can hops on and off without tools. Set it up once, forget about it, and move your suppressor wherever you need it that day.
How the KGM Quick Detach Mount Locks Up
The mounting system pairs a tapered seating surface with a ratcheting secondary retention system, which is a big deal for anyone who cares about point of impact shift. The taper pulls the suppressor into the same position every time, and the ratchet keeps it from backing off under recoil or heat cycling. That combination gives you the fast on-and-off convenience of a QD system without giving up the repeatability you would expect from a direct thread setup. It works with the full lineup of compatible KGM cans, including the R556, R556A1, R556A2, R30A1, and R30A2.
Built Like a Muzzle Device Should Be
When it is not wearing a suppressor, this piece pulls double duty as a birdcage-style flash hider, so your rifle stays practical unsuppressed too. KGM machines it from heat-treated chromoly steel and finishes it with an OXyN gas nitride treatment, which hardens the surface and shrugs off carbon, corrosion, and general range abuse. Nitrided chromoly is the right call for a part that lives at the muzzle and takes the worst of the blast.
Who Should Grab the A-QD-FH-S-3M
If you own or are planning on a KGM R-series suppressor and your rifle wears 3/4×24 threads, this is the mount that ties the system together. Pick one up for each host and your can becomes truly modular. It is a simple part that does its job quietly, which is kind of the whole point.
Key Specifications
- Manufacturer: KGM Technologies
- Manufacturer Part Number: A-QD-FH-S-3M
- UPC: 784668807088
- Model: Quick Detach Flash Hider
- Thread Pattern: 3/4"x24 (SR25 spec)
- Material: Heat-Treated Chromoly Steel
- Finish: OXyN Gas Nitride, Black
- Style: Birdcage Flash Hider
- Mounting System: Taper Mount with Ratcheting Secondary Retention
- Suppressor Compatibility: KGM R556, R556A1, R556A2, R30A1, R30A2
What’s Included
- KGM A-QD-FH-S-3M Quick Detach Flash Hider
Frequently Asked Questions
Which suppressors work with the KGM A-QD-FH-S-3M flash hider?
This mount is built for KGM's R-series cans, specifically the R556, R556A1, R556A2, R30A1, and R30A2. Any of those suppressors will lock onto it using KGM's taper mount and ratcheting retention system. It is not a universal QD mount, so it will not adapt suppressors from other brands.
What rifles use the 3/4×24 thread pattern?
The 3/4×24 pattern is the SR25 muzzle spec, most often found on large-frame AR-10 style rifles and some big-bore and precision builds. Check the thread stamp on your barrel or measure it before ordering. If your barrel runs the more common 5/8×24 or 1/2×28 threads, KGM makes this same flash hider in those pitches too.
Will this QD mount cause point of impact shift when I swap the suppressor on and off?
The tapered mounting surface is designed to seat the suppressor in the same position every time it goes on, which keeps point of impact shift minimal and consistent. The ratcheting secondary retention keeps the can from loosening during firing. Most people find that once they confirm zero suppressed and unsuppressed, the shift stays predictable shot after shot.
Can I run the KGM quick detach flash hider without a suppressor attached?
Absolutely, and that is part of the appeal. It functions as a standard birdcage-style flash hider on its own, so your rifle stays fully usable when the can is on another host. The nitrided chromoly construction holds up fine to regular unsuppressed shooting.


Reviews
There are no reviews yet.