Description
Cadex Defence built its name machining chassis systems and precision rifles for military and competition use, and the CDX-BMG Quake is what happens when that experience gets pointed at the .50 BMG. This is a purpose-built extreme long range rifle, not a novelty big bore. It feeds from a 3-round detachable magazine with one more in the chamber, wears a 29 inch match grade barrel with a 1:15 twist to stabilize heavy fifty caliber bullets, and ships with Cadex's MX4 muzzle brake threaded on 1-14 UNF muzzle threads to knock the recoil down to something you can spot your own impacts through.
Inside the CDX-BMG Quake Action
The heart of the rifle is a heavy duty 1.960 inch diameter custom grade action machined from 416 stainless steel. The fluted four-lug bolt carries a DLC coating for slick cycling and runs a short 50 degree throw, which leaves plenty of room under a big ELR scope. A quarter-turn, tool-free bolt disassembly makes firing pin maintenance painless. Cadex tops it off with their DX2 EVO trigger, which converts between single stage and two stage operation and adjusts for pull weight and shoe position, plus an integral 20 MOA Picatinny rail so you have elevation in the bank for long shots.
The Quake Chassis Does the Heavy Lifting
The Strike Quake chassis uses built-in aluminum micro-chassis technology, so the action drops in with zero bedding work and stays put shot after shot. The buttstock adjusts for cheek height and length of pull, with a soft neoprene cheek pad, a quarter inch spacer included, and a bean bag rider on the toe for squeezing in fine elevation adjustments off a rear bag. Flush cups for QD sling swivels and a 3.5 inch bipod rail up front round out the package.
For ELR matches, ringing steel past a mile, or just owning the biggest hammer at the range, the Quake delivers serious Cadex quality in their most attainable fifty yet.
Key Specifications
- Manufacturer: Cadex Defence
- Model: CDX-BMG Quake
- Manufacturer Part Number: CDXBMGQUA5029HI20I1J5N
- UPC: 842940106257
- Caliber: .50 BMG
- Action: Bolt Action
- Capacity: 3+1
- Barrel Length: 29"
- Twist Rate: 1:15
- Muzzle Threads: 1"-14 UNF
- Muzzle Device: Cadex MX4 Muzzle Brake
- Trigger: DX2 EVO Selectable Single/Two Stage
- Top Rail: Integral 20 MOA Picatinny
- Chassis: Strike Quake w/ Aluminum Micro-Chassis
- Receiver Material: 416 Stainless Steel
- Safety: Ambidextrous
What’s Included
- Cadex CDX-BMG Quake rifle
- One 3-round detachable magazine (MAG2949-3RD)
- MX4 muzzle brake (factory installed)
- 1/4" length of pull spacer
Frequently Asked Questions
How bad is the recoil on the CDX-BMG Quake in .50 BMG?
It is far more pleasant than most people expect from a fifty. The factory MX4 muzzle brake, the rifle's overall heft, and the straight-line Strike Quake chassis all work together to soak up recoil. Most folks find it comparable to a stout magnum hunting rifle rather than the shoulder punisher they were bracing for.
What is the difference between the Cadex Quake and the CDX-50 Tremor?
The Quake is Cadex's more attainable take on their proven .50 BMG platform. It uses a fixed buttstock on the Strike Quake chassis with built-in aluminum micro-chassis technology instead of the Tremor's folding stock and monolithic chassis. You still get the same core Cadex action quality, DX2 EVO trigger, and match grade barrel at a much friendlier cost of entry.
Can I run a suppressor on the CDX-BMG Quake?
Yes, the barrel is threaded 1-14 UNF, which is a common thread pitch for .50 caliber muzzle devices and suppressors. The included MX4 brake removes easily when you want to swap. Just make sure whatever can you choose is rated for .50 BMG pressures.
Is the DX2 EVO trigger adjustable?
It is one of the more flexible triggers in this class. You can convert it between single stage and two stage operation, adjust the pull weight roughly between 1.5 and 2.5 pounds, and reposition the trigger shoe to fit your finger. That lets you set the rifle up for slow precision work or match-style shooting without swapping parts.




Reviews
There are no reviews yet.