Description
Left-handed rimfire fans do not get a lot of options, and even fewer that shoot like a Tikka. The T1x Roughtech in .17 HMR fixes that with a proper left-hand action, so you get a bolt handle and ejection port on the correct side instead of making do with a righty gun flipped around. The action itself is silky smooth thanks to a stainless steel bolt that shrugs off moisture, and the single-stage trigger adjusts from 2 to 4 pounds so you can dial it in for prairie dogs or paper.
A Barrel Built for the .17 HMR Roughtech
The 20-inch cold hammer forged barrel uses Tikka's cross-over profile, which gives you the stiffness and stability of a varmint contour without lugging around varmint-barrel weight. With a 1:9 twist and the .17 HMR's laser-flat trajectory, this thing is tailor made for stretching rimfire distances on squirrels, rabbits, and steel. The muzzle is threaded 1/2×28 and ready for your favorite muzzle device the day you bring it home.
The Roughtech Emerald Stock Earns Its Name
The green-flecked Roughtech synthetic stock has a raised, spattered texture that locks into your hands even when things get slick. It is modular too, with interchangeable pistol grips so you can swap the grip angle to match how you shoot, whether that is prone behind a bipod or offhand in the field. Since the T1x shares its bedding footprint with the centerfire T3x, a good chunk of T3x accessories carry right over if you want to tinker later.
Setting Up Your Left-Hand T1x
There are no iron sights on this one, which is fine because a rifle like this deserves glass. The receiver has an integral 11mm dovetail, and aftermarket Picatinny rails are easy to find if your rings require them. Add a solid rimfire scope, feed it quality 17-grain loads from the included 10-round magazine, and you have a lightweight small-game and target rig that will keep up with rifles costing quite a bit more.
Key Specifications
- Manufacturer: Tikka
- Model: T1x Roughtech Left Hand
- Manufacturer Part Number: JRT1XRT409
- UPC: 082442993614
- Caliber: .17 HMR
- Action: Bolt Action, Left Hand
- Barrel Length: 20 in, Cold Hammer Forged
- Muzzle Thread: 1/2×28
- Twist Rate: 1:9
- Capacity: 10+1
- Trigger: Single-Stage, Adjustable 2-4 lbs
- Stock: Roughtech Emerald Textured Synthetic
- Bolt: Stainless Steel
- Sights: None, Integral 11mm Dovetail Mount
- Barrel Finish: Blued
- Safety: Two-Position
What’s Included
- Tikka T1x Roughtech Left-Hand .17 HMR rifle
- One 10-round detachable magazine
- Owner's manual
Frequently Asked Questions
How do I mount a scope on the Tikka T1x Roughtech?
The receiver has an integral 11mm dovetail groove, so you can clamp rimfire rings directly to it. If you prefer Picatinny rings, plenty of aftermarket rail options bolt right on. There are no iron sights on this model, so plan on adding an optic before your first range trip.
Is the trigger on the T1x Roughtech adjustable?
Yes. It uses a single-stage trigger that adjusts from roughly 2 to 4 pounds, and it comes from the same design pedigree as the trigger in Tikka's centerfire T3x rifles. Most folks find a crisp break right out of the box and only fine-tune it to taste.
Will this left-hand T1x accept a suppressor or other muzzle device?
The 20-inch barrel comes threaded 1/2×28 from the factory, which is the most common rimfire thread pitch in the US. That means most rimfire suppressors and muzzle devices will spin right on without an adapter.
Can I use Tikka T3x accessories on the T1x Roughtech?
For the most part, yes. The T1x shares its stock bedding surfaces with the T3x, and the Roughtech stock accepts interchangeable pistol grips so you can change the grip angle. That cross-compatibility opens up a wide range of stocks, chassis, and grip options down the road.




Reviews
There are no reviews yet.