Description
Anyone who has fought with a factory pivot pin during a build knows the frustration of a launched detent spring or a pin that just won't seat right. Armaspec set out to fix that with their Stainless Steel Takedown and Pivot Pin Set, a pair of upgraded pins that make assembly and teardown a whole lot less aggravating. They drop into any AR-15, M16, or M4 lower running standard .250 diameter pins, so this is a straight swap for your existing hardware.
The design details are where these earn their keep. Each pin has a convex head, which means you can tap it in from whatever angle is convenient instead of fighting to line everything up perfectly. On the flip side, an extended concave tip gives you a spot to push against with a flat blade, a punch, or even the tip of a loaded round if you're out in the field with nothing else handy. It's the kind of thing you don't think about until you need it.
What Makes These Armaspec Pins Different
The standout feature is the patented EZ-Set hole. Detent installation is usually the part of a build that eats up your patience, since the tiny spring loves to disappear across the room. The EZ-Set hole holds things in place while you work, so you spend less time crawling around the floor and more time shooting. Paired with the stainless steel construction, these pins hold up to years of use and resist corrosion better than plain steel.
Getting the Armaspec Takedown and Pivot Pins Installed
The set comes complete with both pins along with fresh detents and springs, so you have everything needed to replace your lower's front and rear pins in one go. The silver stainless finish also gives a clean, polished look that pairs nicely with a two-tone build or a receiver set you want to show off. Function first, good looks second, and these deliver on both.
Key Specifications
- Manufacturer: Armaspec
- Manufacturer Part Number: ARM147-SS
- UPC: 810048491261
- Material: Stainless Steel
- Finish/Color: Silver Stainless
- Product Type: Takedown/Pivot Pin Set
- Pin Diameter: .250 in (Mil-Spec)
- Compatibility: AR-15 / M16 / M4
- Key Feature: Patented EZ-Set detent hole
- Head Design: Convex head for multi-angle tapping
- Tip Design: Extended concave tip for easy removal
What’s Included
- 1x Pivot Pin
- 1x Takedown Pin
- 2x Detents
- 2x Detent Springs
Frequently Asked Questions
Will these Armaspec stainless steel pins fit my AR-15?
Yes, they're built for standard AR-15, M16, and M4 lower receivers running the common .250 diameter pins. If your rifle uses mil-spec hardware, this is a direct swap. They cover both the front pivot pin and the rear takedown pin positions.
What is the EZ-Set hole and why does it matter?
The EZ-Set hole is a patented Armaspec feature that holds the detent in place during installation. Anyone who has installed a pivot pin knows how easily that little spring can launch across the room, and this design cuts down on that headache. It makes seating the detent far less of a fight.
Do these takedown and pivot pins come with detents and springs?
They do. The set includes the pivot pin, the takedown pin, two detents, and two detent springs, so you have everything needed to replace both pins on your lower. There's no need to reuse your old detents or springs.
How do I remove the pins if they get stuck?
Each pin has an extended concave tip that gives you a spot to push against with a flat or pointed tool. In a pinch, even the tip of a loaded round works for field maintenance. That extended tip makes stubborn pins much easier to back out.



Reviews
There are no reviews yet.