Description
When you want your 30mm scope sitting close to the bore with a mount that won't shift under recoil, the Weaver 99520 Precision Tactical rings earn their keep. These are Weaver's top-shelf mounting option, cut from 7075-T6 aluminum and finished in a Type III hardcoat anodize that shrugs off abrasion and holds up to weather and hard use. The low height keeps your optic tucked down tight, which is what you want on a flat-shooting precision build or an AR flattop where cheek weld and a clean sight picture matter.
What Sets the 99520 Precision Tactical Rings Apart
The heart of these rings is a heavy-duty integral cross bolt that delivers true mechanical lockup to your Picatinny or Weaver-style rail. That's a meaningful upgrade over cheaper clamp designs, since it keeps the rings planted even when a hard-kicking rifle tries to walk them. Each cap is secured with four durable Torx head screws, giving you even, repeatable clamping pressure around the scope tube so your zero stays put.
Mounting Your Optic in the Weaver Precision Tactical Rings
Setup is straightforward if you follow Weaver's numbers. The published torque for this family runs 25 in-lbs on the cap screws and 65 in-lbs on the cross bolt. Always cross-check your scope maker's cap torque first, since the tube is the softest part of the stack and some optics call for a lighter number. Lap or at least check ring alignment on a precision build and you'll get the most out of them.
Where the 30mm Low Rings Fit Best
These are a natural match for 30mm maintube scopes on precision bolt guns, modern sporting rifles, and competition setups that run a Picatinny base. The low profile works well with smaller objective bells or when you're chasing the lowest comfortable mount. Made in the USA and built to a serious standard, the 99520 is the kind of ring you mount once and forget about.
Key Specifications
- Manufacturer: Weaver
- Manufacturer Part Number: 99520
- UPC: 604544696431
- Model: Precision Tactical
- Tube Diameter: 30mm
- Ring Height: Low
- Material: 7075-T6 Aluminum
- Finish: Type III Hardcoat Anodized, Matte Black
- Mounting: Picatinny / Weaver Compatible
- Cross Bolt: Heavy-duty integral cross bolt
- Cap Screws: 4 Torx head screws per ring
- Quick Release: No
- Cap Screw Torque: 25 in-lbs
- Cross Bolt Torque: 65 in-lbs
- Country of Origin: Made in USA
What’s Included
- Pair of Weaver Precision Tactical 30mm low scope rings
- Torx head cap screws and integral cross bolt hardware (installed)
Frequently Asked Questions
What size scope tube do the Weaver 99520 Precision Tactical rings fit?
These rings are built specifically for 30mm maintube scopes. They won't fit a 1-inch or 34mm tube, so make sure your optic measures 30mm before ordering. Weaver offers the Precision Tactical line in 34mm separately if that's what you need.
Will the Weaver Precision Tactical rings mount to a Picatinny rail?
Yes. The 99520 uses a heavy-duty integral cross bolt that clamps securely to both Picatinny rails and Weaver-style bases. That mechanical lockup is what keeps them from shifting under recoil on hard-kicking rifles.
What torque should I use on these rings?
Weaver's published specs for the Precision Tactical family call for 25 in-lbs on the cap screws and 65 in-lbs on the cross bolt. One tip worth following: if your scope manufacturer lists a lower cap torque than Weaver does, go with the optic maker's number since the tube is the most delicate part of the setup.
How low do the 99520 low rings sit?
These are the low-height option in the Precision Tactical line, which keeps your 30mm optic tucked close to the rail. That's ideal for smaller objective bells and for getting the lowest comfortable mount on a flattop or precision build. If you're running a large objective, you may need to step up to a taller ring for clearance.




Reviews
There are no reviews yet.