0
0

Weaver Precision Rings 30mm High Matte Black Scope Rings (Pair)

UPC: 604544696417

$95.99

39 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

These Weaver Precision Rings give you a clean, dependable way to mount a 30mm tube optic without adding unnecessary weight to your setup. They're machined from 7075-T6 aluminum, which is the same high-strength alloy you'll find on premium mounts, and finished in a matte black Type III hardcoat anodize that cuts glare and shrugs off the kind of weather that eats cheaper hardware. A built-in recoil lug keeps the rings locked into the rail so your zero stays put shot after shot.

What the High Height Gets You

The high configuration is the sweet spot for a lot of hunting and general-use scopes. It gives you clearance for objectives up to roughly 52mm, so larger glass clears the barrel and rail without crowding. If you're running a mid-to-large objective optic and want a comfortable cheek weld without jamming the bell against the receiver, this height tends to work out well.

How the Weaver Precision Rings Mount Up

These clamp onto both Weaver and Picatinny-style rails and bases, which covers the vast majority of modern rifles and plenty of older setups too. Torx head cap screws handle the ring halves, and Weaver's recommended spec is 25 inch-pounds on the cap screws and the clamp. A torque wrench is worth using here to keep the rings seated evenly and avoid pinching the tube. Proudly made in America, this line carries the kind of no-nonsense reputation Weaver has built over decades of putting glass on rifles.

For anyone building out a hunting rig, a range gun, or a general-purpose bolt gun, this pair hits a solid balance of strength, low weight, and a slim, low-profile footprint that doesn't look bulky on the receiver.

Key Specifications

  • Manufacturer: Weaver
  • Manufacturer Part Number: 48387
  • UPC: 604544696417
  • Tube Diameter: 30mm
  • Ring Height: High
  • Objective Clearance: Up to approximately 52mm
  • Material: 7075-T6 Aluminum
  • Finish: Matte Black Type III Hardcoat Anodized
  • Mounting Compatibility: Weaver and Picatinny rails and bases
  • Recoil Lug: Yes
  • Cap Screw Type: Torx head
  • Recommended Cap Screw Torque: 25 in-lbs
  • Recommended Clamp Screw Torque: 25 in-lbs
  • Country of Origin: USA
  • Shipping Weight: 0.3 lbs

What’s Included

  • Pair of Weaver Precision 30mm high scope rings
  • Torx head cap screws and clamp hardware

Frequently Asked Questions

Will the Weaver Precision Rings fit my Picatinny rail?

Yes. These rings clamp onto both Weaver and Picatinny-style rails and bases, which covers the majority of modern rifles and many older setups. The built-in recoil lug seats into the slot to keep everything locked in place under recoil.

What size objective will the high rings clear?

The high height provides clearance for objectives up to roughly 52mm. That makes this pair a good match for a lot of mid-to-large objective hunting and tactical optics. If you are running smaller glass, a lower height may seat the scope a bit closer to the bore.

Are these the standard Precision rings or the Precision Tactical with the cross-bolt?

This is the standard Weaver Precision line, part number 48387. It uses a recoil lug for secure engagement rather than the heavy-duty integral cross-bolt found on the Precision Tactical models. For hunting and general-use shooting, the recoil lug design holds zero reliably.

What torque should I use when installing these rings?

Weaver recommends 25 inch-pounds on both the cap screws and the clamp screws. Using a torque wrench helps seat the rings evenly and protects the scope tube from being over-tightened or pinched. The Torx head screws make it easy to get consistent, repeatable tension.

Additional information

UPC

604544696417

Manufacturer

Manufacturer Part Number

48387

Shipping Weight

0.3

Reviews

There are no reviews yet.

Be the first to review “Weaver Precision Rings 30mm High Matte Black Scope Rings (Pair)”