Description
The Weaver Precision 30mm Medium scope rings are the kind of mounting hardware you put on once and stop thinking about. Built around a 30mm tube and set at a medium height, they give you clearance for mid-sized objective bells while still keeping the optic tucked in close for a comfortable cheek weld. The whole set is machined from 7075-T6 aluminum, so you get real strength without hanging a bunch of extra weight off the top of your receiver.
What Sets the Weaver Precision Rings Apart
These rings run an integrated recoil lug that locks into the rail slot, which is what keeps your optic from walking under recoil and helps the setup return to zero shot after shot. The caps are secured with Torx head screws, and that style of fastener lets you snug things down with consistent, even pressure without the stripping headaches that come with lesser hardware. Weaver's recommended torque is 25 in-lbs on the cap screws and 25 in-lbs on the clamp screw, so a good inch-pound wrench makes install quick and repeatable.
Fit and Finish on the 30mm Medium Rings
The matte black Type III hardcoat anodized finish does double duty. It fights off corrosion and holiday wear from field use, and it keeps glare down so you're not flagging game or your position with a shiny ring up top. The footprint is low-profile and clean, which looks right at home on a hunting rifle or a general-purpose range gun.
These clamp to standard Weaver and Picatinny bases and rails, which covers the vast majority of modern rifles and mounts out there. Made in America, the Precision line carries Weaver's long reputation for no-nonsense optic mounting that hunters and range regulars have trusted for decades. Pair them with a quality base and a 30mm-tube scope and you've got a dependable foundation that stays put.
Key Specifications
- Manufacturer: Weaver
- Manufacturer Part Number: 48386
- UPC: 604544696400
- Tube Diameter: 30mm
- Ring Height: Medium
- Material: 7075-T6 Aluminum
- Finish: Type III Hardcoat Anodized, Matte Black
- Mount Compatibility: Weaver and Picatinny Rails and Bases
- Cap Screw Type: Torx Head
- Recoil Lug: Integrated
- Cap Screw Torque: 25 in-lbs
- Clamp Screw Torque: 25 in-lbs
- Country of Origin: Made in USA
- Shipping Weight: 0.3 lbs
What’s Included
- Pair of Weaver Precision 30mm Medium scope rings
- Torx cap screws and clamp hardware
Frequently Asked Questions
Will the Weaver Precision 30mm Medium rings fit my rail?
Yes, as long as your rifle has a standard Weaver or Picatinny base or rail. These rings clamp to both, which covers the majority of modern bolt guns and flat-top setups. Just make sure your optic has a 30mm main tube, since these are sized specifically for 30mm.
What height do these rings sit at and will they clear my scope?
These are the Medium height version in Weaver's Precision line. Medium rings generally give enough clearance for small-to-mid-size objective bells while keeping the optic low for a natural cheek weld. If you're running a large objective, say 50mm or bigger, you'll want to compare against the high version to be safe.
How tight should I torque the Weaver Precision rings?
Weaver recommends 25 in-lbs on the Torx cap screws and 25 in-lbs on the clamp screw. Using an inch-pound torque wrench keeps your pressure even across the caps and helps the optic hold zero. Going by feel can over-tighten and dent a scope tube, so a wrench is worth it here.
Do these rings have a recoil lug to help hold zero?
They do. The integrated recoil lug seats into the rail slot and keeps the rings from shifting under recoil, which is what gives you that repeatable return to zero. Combined with the 7075-T6 aluminum build, it makes for a solid, no-drama mounting platform.




Reviews
There are no reviews yet.