Description
The 7mm PRC was designed to push heavy, high-BC bullets fast and flat, and the Christensen Arms MPR gives that cartridge a platform worthy of it. The 26 inch target contour barrel starts as 416R stainless steel, gets wrapped in aerograde carbon fiber, and finishes with a hand lapped bore and match chamber. That build sheds heat quickly, trims weight where a steel target barrel would punish you, and holds its point of impact through long strings. A removable stainless side baffle brake caps the 5/8×24 threaded muzzle, and its top ports can be tuned to shape the recoil impulse to your liking. With the 1:8 twist, it stabilizes the long 175 to 195 grain bullets that make this cartridge shine at distance.
A Chassis Built Around the Shooter
The MPR rides in a 100 percent proprietary 7075 billet aluminum chassis finished in Tungsten Cerakote, with a folding stock on a locking hinge that brings a 47 inch rifle down under 39 inches for packing into a truck or a tight blind. Length of pull adjusts from 12.5 to 14.5 inches, the carbon fiber cheek riser dials in your eye alignment behind big glass, and the free floating carbon fiber M-LOK handguard gives you room for a bipod, barricade stop, or ARCA setup. QD points along the stock make sling and bag work simple.
MPR 7mm PRC Accuracy You Can Count On
A match grade TriggerTech flat trigger breaks clean and adjusts from roughly 2.5 to 3.5 pounds, and the spiral fluted bolt with oversized knob runs fast from the shoulder. The 20 MOA rail sits ready for a long range scope, and the whole package carries the Christensen Arms Sub-MOA guarantee. Feeding comes from a detachable 5 round box magazine.
Where the Christensen Arms MPR Fits
This is the rifle for the hunter who shoots matches in the off season, or the precision shooter who wants one rig that can climb a mountain. At around 7.9 pounds bare, it hits a sweet spot between steady on the bipod and honest to carry, and the 7mm PRC gives it reach that few chamberings can match.
Key Specifications
- Manufacturer Part Number: 801-03106-00
- UPC: 840290520433
- Caliber: 7mm PRC
- Action: Bolt Action, Spiral Fluted Bolt
- Barrel: 26 in. 416R Stainless, Carbon Fiber Wrapped, Hand Lapped
- Twist Rate: 1:8
- Muzzle: 5/8×24 Threaded, Removable Side Baffle Brake
- Capacity: 5+1, Detachable Box Magazine
- Chassis: 7075 Billet Aluminum, Folding Stock with Locking Hinge
- Finish: Tungsten Cerakote / Black Nitride Action
- Trigger: TriggerTech Flat, Adjustable 2.5-3.5 lbs
- Length of Pull: Adjustable 12.5-14.5 in.
- Optics Mount: 20 MOA Rail, Remington 700 Base Compatible
- Handguard: Free-Floating Carbon Fiber M-LOK
- Overall Length: 47 in.
- Weight: Approx. 7.9 lbs
What’s Included
- Christensen Arms MPR bolt action rifle
- One 5-round detachable box magazine
- Removable stainless steel side baffle muzzle brake (installed)
- Owner's manual
Frequently Asked Questions
Does the Christensen Arms MPR come with a scope or iron sights?
No, it ships without optics or irons. It does come with a 20 MOA rail machined right in, so you can bolt on a long range scope and take advantage of the extra elevation for shooting at distance. The action is also Remington 700 base compatible if you prefer a different mounting setup.
How accurate is the MPR in 7mm PRC?
Christensen Arms backs this rifle with their Sub-MOA guarantee, and the hand lapped, carbon fiber wrapped barrel with a match chamber is built to deliver on it. Feed it quality match or premium hunting ammo and it will hold tight groups, and the carbon wrap helps the barrel stay consistent through longer strings of fire.
Is the MPR too heavy to hunt with?
Not really. At roughly 7.9 pounds bare in this 26 inch configuration, it is lighter than most chassis rifles with a target profile barrel. The folding stock also drops the overall length under 39 inches, which makes it much easier to strap to a pack or slide behind a truck seat.
Can I tune or remove the muzzle brake on the MPR?
Yes. The stainless side baffle brake threads onto a standard 5/8×24 muzzle, so it comes off easily if you want to run a suppressor or a different device. The top ports are plugged with removable screws, letting you adjust how the brake handles muzzle rise and recoil.



Reviews
There are no reviews yet.