Description
The BOG DeathGrip Bantam takes everything folks love about the original DeathGrip and trims it down for hunters who count every ounce in their pack. At roughly 3.1 pounds, it rides on the side of a pack without throwing off your balance, which makes a real difference on long treks in and out of a spot. The small-diameter aluminum legs keep the weight low without giving up the steadiness you're after when a shot finally presents itself.
What the DeathGrip Bantam Head Does Best
The heart of this tripod is the dual-action DeathGrip clamping head. Instead of just resting your forend on a yoke, you tighten the head down around the stock and it locks the gun in place. It grips tight enough that you can set the rifle down, step back, and it holds the same aim. Non-marring rubber inserts keep the finish on your stock safe while that clamp does its job, and the head handles anything up to 40 pounds, so it's not picky about what you hang on it.
Dialing In Your Shot With the Bantam
Height adjusts from 20 to 42 inches using twist-style leg locks, which deploy quick and quiet when a deer or bird steps out. That range covers you from a seated position on a hillside to a kneeling setup in a blind. The head gives you 120 degrees of tilt and a full 360 degrees of pan, so you can track a moving target smoothly or angle down on uneven ground. Rubber feet add traction and cut down on noise when you're setting up on hard surfaces.
Field-Ready in Realtree Origin
This version wears Realtree Origin camo to help it blend into natural cover, whether you're tucked into a treeline or sitting a field edge. When it's time to move, the rubber leg retention strap keeps everything bundled together so the legs don't clatter. It pairs well with bolt guns, ARs, shotguns, and crossbows, making it a solid all-around pick for hunters who move a lot and still want that rock-solid rest waiting when the moment comes.
Key Specifications
- Manufacturer: BOG
- Manufacturer Part Number: 1237508
- UPC: 198700004517
- Model: DeathGrip Bantam
- Camo Pattern: Realtree Origin
- Leg Material: Aluminum
- Weight: 3.1 lbs
- Height Range: 20 in to 42 in
- Max Load Capacity: 40 lbs
- Head Type: Dual-action DeathGrip clamping head
- Tilt: 120 degrees
- Pan: 360 degrees
- Leg Locks: Twist-style
- Feet: Rubber, non-slip
- Best For: Sitting to kneeling positions
What’s Included
- BOG DeathGrip Bantam tripod with legs
- DeathGrip Bantam dual-action clamping head
- Rubber leg retention strap
Frequently Asked Questions
How much does the DeathGrip Bantam weigh and is it easy to carry?
The Bantam comes in at about 3.1 pounds, which makes it one of the lightest tripods that still packs the full DeathGrip head. Strapped to the side of a pack, it barely registers on a long walk in. That light weight is the whole reason a lot of hunters reach for the Bantam over the heavier original DeathGrip.
What kind of firearms will the DeathGrip Bantam hold?
The clamping head grabs bolt-action rifles, ARs, shotguns, and crossbows, handling anything up to 40 pounds. Reviewers have run it with lightweight ARs and heavier bolt guns alike with no wobble. Non-marring rubber inserts keep your stock finish safe while the head clamps down.
How tall does the Bantam tripod adjust, and what positions work best?
It adjusts from 20 to 42 inches using twist-style leg locks. That range is built for seated and kneeling shooting, which is exactly what you want from a blind, on a hillside, or working a field edge. If you're mostly shooting from standing, you may want to look at one of BOG's taller models instead.
Can I leave my gun clamped in the DeathGrip Bantam and step away?
Yes, that's the whole point of the DeathGrip head. Once you tighten it down around the forend, it locks the gun so securely you can take your hands off and come back to the same sight picture. That takes a lot of the human wobble out of the equation right when you need to focus on your trigger squeeze.



Reviews
There are no reviews yet.