Description
Wood stocks have always looked the part in the deer woods, but they were never known for holding a zero the way a modern chassis does. The Timbr Core Hunt is MDT's answer to that old tradeoff. It pairs a solid walnut, sporter-style stock with an internal aluminum micro-chassis, so you get the classic feel and looks you want alongside the repeatability that keeps your groups tight season after season. This particular setup ships configured for the Remington 700 short action and comes paired with MDT's Hunting bottom metal for AICS magazine feeding right out of the gate.
What Makes the Timbr Core Hunt Tick
The heart of this stock is the V-block bedding system built into that aluminum micro-chassis. It locks your barreled action in place without any traditional bedding or a trip to the gunsmith. You lay the action in, torque the screws to spec, and you're shooting. That metal backbone keeps the action from shifting with changes in temperature and humidity, which is exactly the kind of point-of-impact drift that plagues old-school solid wood stocks. The barrel channel is generous too, running free-floated all the way up to an M24 contour barrel.
Built to Actually Hunt With
MDT gave this one a modern geometry hiding under the traditional lines. The comb sits a touch higher to get you behind a scope comfortably, and the flatter belly rides a rear bag nicely when you settle in for a longer poke. Length of pull adjusts with 1/4-inch spacers so you can dial the fit to you or your layers, and there are sling swivel studs up front for a bipod and sling plus one in the rear. A rubber recoil pad soaks up the thump. Since it runs on an internal chassis, you also get to feed from AICS-pattern magazines in whatever capacity suits your hunt, a big step up from a blind-magazine wood stock.
Installation is about as simple as it gets. Grab an Allen key, set your action, and torque it down. No gunsmithing, no fuss, and you've turned a plain-Jane Rem 700 into a rifle that looks like an heirloom and shoots like a precision build.
Key Specifications
- Manufacturer: MDT
- Manufacturer Part Number: 116106CCL
- UPC: 990482728564
- Action Fit: Remington 700 Short Action (Right Hand)
- Stock Material: Solid Walnut with aluminum micro-chassis
- Bedding: V-block bedding system, no gunsmithing required
- Bottom Metal: MDT Hunting Bottom Metal (AICS magazine compatible)
- Magazine Compatibility: AICS-pattern magazines
- Length of Pull: 13.6 in. to 14.6 in., adjustable via 1/4 in. spacers
- Comb Height: Fixed, raised for optic use
- Barrel Channel: Free-floated up to M24 contour
- Sling Studs: Two front (bipod and sling), one rear
- Recoil Pad: Rubber buttpad
- Approx. Weight: 2.81 lbs with Hunting Bottom Metal
What’s Included
- MDT Timbr Core walnut stock with integrated aluminum micro-chassis
- MDT Hunting bottom metal
- Length of pull spacers
Frequently Asked Questions
Does the Timbr Core Hunt fit any Remington 700 short action?
It's built for right-hand Remington 700 short action receivers and 700-pattern clones like Zermatt Arms actions. The action drops into the V-block micro-chassis and torques down without any bedding work. If your receiver follows the standard Rem 700 short action footprint, you're in good shape.
Do I need to do any bedding or gunsmithing to install this chassis?
No. The aluminum micro-chassis with V-block bedding does that work for you, so there's no glass bedding or fitting required. You just lay the barreled action in, torque the action screws to spec with an Allen key, and you're ready to shoot.
What magazines does the Timbr Core Hunt use?
This configuration comes with MDT's Hunting bottom metal, which feeds AICS-pattern magazines. That means you can run polymer or metal AICS mags in whatever capacity works for your hunt, a nice upgrade over a traditional blind-magazine wood stock.
Will a heavier or bull barrel clear the stock?
The barrel channel is free-floated and will accept contours up to an M24 profile without touching the wood. Anything at or below that will float cleanly, which helps keep your accuracy consistent. Very heavy palma or straight bull contours beyond M24 may make contact.



Reviews
There are no reviews yet.