Description
The Kinetic Development Group SCP5-MK2-201 is the black version of KDG's MK2 folding stock built specifically for the FN SCAR family. It's a full replacement for the factory buttstock, and it fixes the two things SCAR owners tend to grumble about most: bulky storage and limited adjustability. Developed alongside Haga Defense and A3 Industries, it uses all-metal internals wrapped in a mix of 6061 aluminum, nitride-coated stainless steel, and 30% glass fiber reinforced nylon, so it holds up to real use without feeling heavy at around 20.6 ounces.
Dialing In the SCP5-MK2 Fit
Where the factory stock leaves you stuck, this one opens up. You get 7 length-of-pull positions in half-inch increments running roughly 1.28 to 10.28 inches, plus a 3-position cheek riser at 0, +0.25, and +0.50 inches. That combination matters more than it sounds, because getting your cheek weld right behind a magnified optic on a SCAR is half the battle. Whether you're set up for prone precision work or running it fast with a red dot, you can tune the fit to your body and your glass.
Why the MK2 Folding Hinge Earns Its Keep
The heart of the SCP5-MK2-201 is a heavy-duty locking hinge machined from 17-4 stainless steel and nitride coated. It folds to the left, canted at 3.5 degrees so it tucks in cleanly against the receiver, and it locks up solid in both the open and folded positions with no wobble. That means your rifle shrinks down for a case, a pack, or a truck, then snaps back to a rigid shooting platform when you need it. Folks who've run it alongside the OEM stock consistently call it noticeably tighter and more solid.
Installation is genuinely simple. It's a direct drop-in for the SCAR 15P, 16, 17, and 20S, so no tools, no modifications, and no trip to a gunsmith. Built-in QD sling points and a rear sling loop round it out, making it easy to hang whatever sling setup you already run.
Key Specifications
- Manufacturer: Kinetic Development Group
- Manufacturer Part Number: SCP5-MK2-201
- UPC: 850045704445
- Color: Black
- Style: Side-Folding, Adjustable
- Fit: FN SCAR 15P, 16, 17, 20S
- Length of Pull: 1.28" to 10.28", 7 positions in 0.5" increments
- Cheek Riser: 3-Position (0, +0.25", +0.50")
- Hinge: Nitride-coated 17-4 stainless steel, folds left canted 3.5 degrees
- Extrusion: 6061-T6 aluminum, hardcoat anodized
- Latch: 7075 aluminum
- Body Material: 30% glass fiber reinforced nylon
- Butt Plate: Textured Santoprene TPE
- Weight: 20.64 oz
- Width: Approximately 5.5"
- Installation: Tool-free drop-in, no modifications
What’s Included
- KDG SCP5-MK2-201 FN SCAR folding stock (Black)
- Integrated rear sling loop
- Two steel QD mounting points
Frequently Asked Questions
Which FN SCAR models does the SCP5-MK2-201 fit?
It's designed for the FN SCAR 15P, 16, 17, and 20S. The mounting interface is the same across those platforms, so the same stock works whether you're running a 16S in 5.56 or a 17S in 7.62. It's a direct fit, not a universal adapter setup.
Is the KDG SCAR stock hard to install?
Not at all. It's a true drop-in replacement that swaps in without tools or gunsmithing, so most people have it on the rifle in a couple of minutes. You're just removing the factory stock and mounting this one in its place.
Can you fire the rifle with the MK2 stock folded?
The hinge locks up tight in the folded position and holds the stock securely against the receiver for carry. For actual shooting, extend it out so you get a proper cheek weld and full stability. The folded position is meant for transport and storage, not firing.
How is the SCP5-MK2 different from the factory SCAR stock?
The big wins are the folding hinge for compact storage and the added adjustability the factory unit doesn't offer. You get 7 length positions and a 3-position cheek riser to fine-tune fit behind your optic. Owners who've compared them side by side generally find this one tighter and more solid with less wobble.





Reviews
There are no reviews yet.