0
0

Bore Tech C4 Carbon Remover, 4 oz – Ammonia-Free Bore Cleaner

UPC: 667739980050

$19.99

34 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Carbon is the fouling that gives most people fits, especially the hard, baked-on stuff that builds up in rifle throats, chamber necks, AR bolt tails and shotgun gas pistons. Bore Tech's C4 Carbon Remover goes after exactly that with a water-based formula built around a blend of surfactants, penetrants and suspending agents that loosen carbon deposits and lift them off the surface. It works on contact and keeps working while it soaks, so you spend less time scrubbing and more time shooting.

What sets C4 apart from a lot of the harsh stuff on the shelf is what it leaves out. There's no ammonia, it's non-flammable, biodegradable and low-odor with a mild citrus smell, which makes it a lot more pleasant to use at an indoor bench or a kitchen table without stinking up the whole house. It's built to be safe on barrel steels, stainless and chrome-lined bores, and it won't chew up bluing, parkerizing or coatings during normal use.

Where the C4 Carbon Remover Earns Its Keep

This one is a genuine do-it-all carbon cleaner. It's a favorite for rifle barrels, throats and chambers, AR bolts and bolt carriers, flash suppressors, compensators, suppressors, revolver cylinders and gas pistons. A trick a lot of folks swear by is soaking a heavily carboned part like a piston or bolt tail in a jar of C4 while they run patches through the bore, then coming back to a part that wipes clean.

Getting the Most Out of Bore Tech C4

The routine is simple. Run a few wet patches through the bore in one direction to clear loose fouling, make a handful of passes with a saturated brush, then re-wet and let it sit for five to ten minutes. Badly neglected bores and carbon rings may want a longer soak, and folks who follow the steps and give it time to work tend to be the happiest with the results. Made in the USA.

Key Specifications

  • Manufacturer: Bore Tech
  • Product Type: Carbon Remover
  • Container Size: 4 oz
  • Form: Liquid
  • Odor: Mild Citrus
  • Base: Water-Based, Ammonia-Free
  • Application: Firearm carbon fouling removal
  • Cap Type: Twist Open/Close Dispensing Cap with Foam Gasket Seal
  • Appearance: Clear/Light Amber
  • Made In: USA
  • Manufacturer Part Number: BTCC-35004
  • UPC: 667739980050

What’s Included

  • 1 Bore Tech C4 Carbon Remover, 4 oz squeeze/dispensing bottle

Frequently Asked Questions

Is Bore Tech C4 Carbon Remover safe for my barrel and finish?

Yes. C4 is a barrel-safe formula that works on standard, stainless and chrome-lined bores, and it won't harm bluing, parkerizing or coatings during normal cleaning. For long soaks on coated parts, it's smart to test a small hidden area first just to confirm compatibility.

Does the C4 Carbon Remover have a strong smell or ammonia?

No ammonia here. It's a water-based, low-odor formula with a mild citrus scent, which makes it far easier to use at an indoor bench than the harsh ammonia and solvent cleaners a lot of people are used to. It's also non-flammable and biodegradable.

How do I use Bore Tech C4 for a bad carbon ring?

Run a few wet patches through the bore in one direction, make ten to fifteen passes with a saturated brush, then re-wet and let it soak five to ten minutes before pushing dry patches through. Stubborn carbon rings and heavily fouled bores usually just need a longer soak. For parts like gas pistons or AR bolt tails, many people soak them in a small jar of C4 while they clean the bore.

Will C4 remove copper fouling too?

C4 is built specifically for carbon, not copper. If you're chasing copper fouling, you'll want a dedicated copper remover like Bore Tech's Cu+2 to pair with it. Using a carbon remover and a copper remover together covers both of the main fouling types in most rifle bores.

Additional information

UPC

667739980050

Manufacturer

Manufacturer Part Number

BTCC35004

Product Type

Carbon Remover

Quantity

1

Reviews

There are no reviews yet.

Be the first to review “Bore Tech C4 Carbon Remover, 4 oz – Ammonia-Free Bore Cleaner”