Description
There are a lot of rifles that claim to be mountain guns, and then there is the Mark V Backcountry 2.0 Ti. Weatherby built this one around a titanium version of their legendary six-lug Mark V action, and the strength-to-weight payoff is real. You get the fast 54-degree bolt throw and smooth spiral-fluted bolt the Mark V is known for, in a receiver that shaves serious ounces off a standard steel action. This version wears a full 24 inch fluted barrel in 338 WBY RPM, so you keep the velocity advantage that shorter-barreled versions of this cartridge give up.
Why the Backcountry 2.0 Ti Earns Its Spot in the Pack
The 338 WBY RPM was designed specifically to run through the trim six-lug Mark V action, delivering true big-bore performance on elk, moose, and big bears without the bulk of a traditional magnum rifle. Feeding comes from an internal magazine with a hinged floorplate holding 4+1. Up front, the threaded muzzle wears Weatherby's Accubrake ST, with symmetrical porting blended right into the barrel profile to take the sting out of a hard-hitting cartridge in a light rifle. Out back, the second generation 3DHEX recoil pad uses 3D printed collapsible structures that stretch out the recoil impulse, turning a sharp shove into something much more manageable. Between the two, this rifle is far more pleasant behind the trigger than its weight suggests.
Backcountry 2.0 Ti Details That Matter in the Field
The Peak 44 Blacktooth carbon fiber stock is one of the lightest production stocks you can get, finished in bare carbon with grey and white sponge accents that look sharp and hide wear. The barrel and bolt are sealed under Graphite Black Cerakote to shrug off weather, while the raw titanium receiver comes drilled and tapped for scope bases. An adjustable TriggerTech trigger and a simple two-position thumb safety round out a package that feels like a custom build straight from the factory. If you count ounces before every hunt but refuse to compromise on hitting power, this is the rifle that settles the argument.
Key Specifications
- Manufacturer: Weatherby
- Model: Mark V Backcountry 2.0 Ti
- Manufacturer Part Number: MBT20N338WR6B
- UPC: 747115463381
- Caliber: 338 WBY RPM
- Action: Bolt Action, 6-Lug Mark V
- Barrel Length: 24" fluted, threaded (26" overall with brake)
- Muzzle Device: Accubrake ST
- Twist Rate: 1:10"
- Capacity: 4+1, internal magazine with hinged floorplate
- Receiver: Titanium, drilled and tapped for scope bases
- Stock: Peak 44 Blacktooth carbon fiber, grey/white sponge accents
- Recoil Pad: 3DHEX 3D-printed recoil pad
- Trigger: TriggerTech, adjustable
- Metal Finish: Graphite Black Cerakote
- Safety: Two-position thumb safety
What’s Included
- Weatherby Mark V Backcountry 2.0 Ti rifle with Accubrake ST installed
- Owner's manual and factory documentation
Frequently Asked Questions
What is the 338 WBY RPM cartridge, and what game is it suited for?
The 338 WBY RPM (Rebated Precision Magnum) is Weatherby's 338 caliber round built on the 6.5 RPM case, necked up and designed to fit the slim six-lug Mark V action. It delivers genuine big-bore energy suited for elk, moose, and large bears while keeping the rifle itself compact and light. It is a proven efficient cartridge, and the 24 inch barrel on this model wrings out its full velocity potential.
How bad is the recoil on a rifle this light in a magnum chambering?
It is far more manageable than you would expect. The Accubrake ST uses symmetrical porting to redirect gases and knock down recoil substantially, and the 3DHEX pad has 3D printed internal structures that collapse progressively to spread the impulse over more time. Together they make this lightweight magnum genuinely comfortable for range sessions and practice, not just one shot on game.
Does the Backcountry 2.0 Ti come with sights or a scope?
No, it ships without iron sights or optics. The titanium receiver comes drilled and tapped from the factory, so you just need to add bases, rings, and the scope of your choice. Given how light this rifle is, pairing it with a lightweight scope and mounts keeps the whole setup true to its mountain rifle mission.
Can I run a suppressor on this Mark V Backcountry 2.0 Ti?
Yes. The 24 inch barrel has a threaded muzzle, and the factory Accubrake ST can be removed to mount a suppressor or thread protector. Just verify your suppressor or mount matches the muzzle thread pitch, and keep in mind a can will add length and weight up front compared to the brake.



Reviews
There are no reviews yet.