$100.00
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Apex Tactical Duty/Carry Kit (part number 100076) is built to sharpen up the trigger on the Smith & Wesson M&P Shield in both 9mm and 40 S&W. If your Shield feels gritty, heavy, or vague at the reset out of the box, this kit takes care of all three at once. It swaps in a fully machined sear, an Ultimate Striker Block assembly, and a matched spring set to smooth out the whole trigger stroke. The result is a pull that runs roughly two pounds lighter than factory, with a cleaner break and a reset you can feel and hear.
Every piece in this kit is designed to work together rather than as one-off parts. The machined sear trims pull weight and over-travel, the striker block smooths the take-up before the trigger bar engages, and the spring set lands your pull in the mid-five-pound range. Once it is all assembled, the reset sits close to the break, which lets you stage follow-up shots quickly without hunting for the wall. It is a favorite among carry and duty users precisely because it keeps that consistent, predictable feel round after round.
Apex designed this as a drop-in kit for the home tinkerer, and the frame-side parts go in without much fuss. The one job that trips people up is the Ultimate Striker Block, since installing it means driving out the rear sight, which can be stubborn. The kit includes the Talon Tactical sight tool and a slave pin to help, but if you are not comfortable pulling a rear sight or you do not have a proper brass punch, having an armorer or gunsmith handle the slide work is the smart move.
Apex Tactical has been the go-to name in drop-in M&P performance parts for years, and this kit is made in the USA. Note that it is built for the standard M&P Shield and Shield 2.0 in 9mm and 40, not the Shield 45 or Shield EZ. Pair it with an Apex flat-faced trigger if you want the full package, or run it with your factory trigger and still gain a serious upgrade in feel.
This kit is made for the standard Smith & Wesson M&P Shield and Shield 2.0 chambered in 9mm and 40 S&W. It is not built for the Shield 45 or the Shield EZ, so double-check your model before ordering. If you have a Shield Plus, Apex offers a different part number for that platform.
The frame-side components are designed as a drop-in for a capable home installer. The trickier part is the Ultimate Striker Block, which requires removing the rear sight from the slide, and that step can be tough without the right punch. If you are not confident pulling the sight, Apex strongly recommends letting an armorer or gunsmith handle the slide work.
Expect a pull that is roughly two pounds lighter than the factory setting, landing in the mid-five-pound range. Exact results vary with your pistol's factory tolerances. Beyond the weight drop, you also get a smoother take-up, reduced over-travel, and a more detectable reset.
No, the Duty/Carry Kit works with your existing factory trigger and upgrades the internals for a better feel. If you want a new trigger too, it pairs directly with the Apex flat-faced Action Enhancement Trigger for the Shield.
| UPC | 856008005222 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100076 |
| Model | |
| Style | Enhanced |
You must be logged in to post a review.
Reviews
There are no reviews yet.