0
0

Strike Industries AR Modular Mag Catch – Steel & Polymer 3 Buttons

UPC: 793811764048

$32.95

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Most folks don't think twice about their AR mag release until they're fumbling for it under a glove or realizing the stock button sits a little too flush for their thumb. The Strike Industries AR Modular Mag Catch takes the guesswork out of it by handing you three different button sizes in one package, so you can tune the feel to your hand and your setup instead of settling for whatever came on the rifle.

What Sets the SI Modular Mag Catch Apart

The clever bit here is that you don't have to yank the whole catch out to change the button. A quick push on the mag button adapter with any small object that fits the gap pops the button loose, and you swap in whichever size you want. That means you can test a standard button at the bench, throw on the oversized one before a match, and dial it back down later without breaking down your lower again. The buttons are textured for a positive, non-slip surface, which matters when your hands are cold, wet, or wearing gloves.

Built to Take a Beating

Strike went with a mix of materials that make sense for a working part. The three buttons are molded from lightweight polymer to keep weight down, while the shaft sleeve and button adapter are SUS630 stainless steel and the catch itself is steel. That combination gives you the durability you want in a high-use control without adding unnecessary ounces to the rifle.

Fitment and Install

This is a drop-in assembly that comes complete with the catch, spring, adapter, sleeve, and all three buttons, so there's nothing extra to source. It's built for Mil-Spec AR-15 lowers as well as DPMS-pattern AR-10 receivers, which covers the vast majority of builds out there. If you've swapped a stock mag catch before, this is a familiar job, and even first-timers can knock it out with a little patience.

Key Specifications

  • Manufacturer: Strike Industries
  • Manufacturer Part Number: ARMMR
  • Model: SI-AR-MMR
  • UPC: 793811764048
  • Included Buttons: Standard, Extended, Oversized
  • Button Material: Lightweight Polymer
  • Shaft Sleeve & Adapter: SUS630 Stainless Steel
  • Magazine Catch Material: Steel
  • Finish: Black
  • Surface: Textured for positive feel
  • Installation: Drop-in
  • Compatibility: Mil-Spec AR-15 and DPMS-pattern AR-10 lowers

What’s Included

  • 1x Steel magazine catch
  • 1x Mag catch spring
  • 1x Mag button adapter
  • 1x Mag catch shaft sleeve
  • 1x Standard mag button
  • 1x Extended mag button
  • 1x Oversized mag button

Frequently Asked Questions

Can I change buttons on the Modular Mag Catch without removing it from the rifle?

Yes, that's the whole point of the design. A quick push on the mag button adapter with a small object that fits the gap releases the button so you can swap it out. The catch stays right where it is in your lower, so you can change your feel at home or at the range in seconds.

Will the Strike Industries AR Modular Mag Catch fit my AR-10?

It's built for Mil-Spec AR-15 lowers and DPMS-pattern AR-10 receivers. The AR-10 platform generally accepts AR-15 mag catches, buttons, and springs, so most DPMS-style lowers will take this without an issue. If you're running an Armalite-pattern AR-10, it's worth double checking your specific receiver first.

What's the difference between the three included buttons?

You get a standard button that sits close to a factory profile, an extended button that reaches a little further out from the lower, and an oversized button with a bigger surface for easier location. The extended and oversized options are handy if you want a faster, more positive press or run gloves. Being able to try all three and settle on your favorite is the main draw of this kit.

Is the Modular Mag Catch hard to install?

Not particularly. It comes as a complete drop-in assembly with the catch, spring, adapter, sleeve, and all three buttons, so there's nothing extra to buy. If you've replaced a standard AR mag catch before, this follows the same basic process, and first-timers can handle it with a little care.

Additional information

UPC

793811764048

Manufacturer

Manufacturer Part Number

ARMMR

Reviews

There are no reviews yet.

Be the first to review “Strike Industries AR Modular Mag Catch – Steel & Polymer 3 Buttons”