Description
There is something satisfying about a large-frame AR that does not feel like a boat anchor, and that is exactly what Diamondback pulled off with the DB10 Carbon pistol. At 5.1 pounds and 30 inches overall, this .308 Win handles quicker than most people expect from the platform. The forged 7075-T6 upper and lower wear a Flat Dark Earth Cerakote finish, and the black Magpul furniture against that FDE gives it a sharp two-tone look right out of the box. Diamondback builds these in-house at their Cocoa, Florida facility, and the Carbon Series is their way of delivering a solid, working-grade gun without piling on extras that drive the cost up.
What Makes the DB10 Carbon Pistol Tick
The 13.5-inch barrel is 4150 chrome moly vanadium with a black nitride treatment for corrosion resistance and long service life, spun with a 1:10 twist that stabilizes the full range of common .308 bullet weights. The muzzle is threaded 5/8×24 behind the included A2 flash hider, so swapping to a brake or suppressor mount is a five-minute job. A mid-length gas system takes some of the edge off the recoil impulse, and the bolt carrier is shot-peened, MP-inspected 8620 steel, which is the kind of quality control you want in a hard-running .308.
Set Up the DB10 Your Way
The 13-inch M-LOK handguard runs nearly the full length of the barrel and includes anti-slip texture pads, giving you plenty of real estate for lights, hand stops, or a bipod. The flat-top Picatinny upper is a blank canvas for a red dot or LPVO, and the SB Tactical SBA3 brace adjusts to fit different shooters and gear setups. A Magpul MOE K grip rounds out the furniture, and Diamondback ships it with a 20-round Gen M3 PMAG. For truck gun duty, hog control in thick brush, or just having a compact .308 that hits well above its size, this one covers a lot of ground.
Key Specifications
- Manufacturer: Diamondback Firearms
- Model: DB10 Carbon Series Pistol
- MPN: DB1222C062
- UPC: 810035753464
- Caliber: .308 Winchester / 7.62 NATO
- Action: Semi-Auto, Direct Impingement
- Gas System: Mid-Length
- Barrel Length: 13.5", 4150 CMV, Black Nitride
- Twist Rate: 1:10
- Muzzle Thread / Device: 5/8×24, A2 Flash Hider
- Handguard: 13" M-LOK with Anti-Slip Texture Pads
- Receivers: Forged 7075-T6 Aluminum, FDE Cerakote
- Brace: SB Tactical SBA3, Adjustable
- Grip: Magpul MOE K
- Capacity: 20+1
- Overall Length / Weight: 30" / 5.1 lbs
What’s Included
- Diamondback DB10 Carbon .308 Win pistol
- One 20-round Magpul Gen M3 PMAG
- SB Tactical SBA3 brace (installed)
- A2 flash hider (installed)
Frequently Asked Questions
Can I run a suppressor on the DB10 Carbon pistol?
Yes. The 13.5-inch barrel is threaded 5/8×24, which is the standard thread pitch for .30 caliber muzzle devices and suppressor mounts. Just remove the included A2 flash hider and install your mount of choice. The nitride-treated 4150 CMV barrel holds up well to suppressed use.
Is the DB10 heavy for an AR pistol?
Not at all, and that is one of its strongest points. At 5.1 pounds bare, it is lighter than plenty of 5.56 builds, let alone other large-frame .308s. Keep in mind that .308 out of a light gun has some pop to it, but the mid-length gas system helps smooth out the recoil impulse noticeably.
Does the Diamondback DB10 come with sights or an optic?
No, it ships without sights. The flat-top Picatinny upper gives you a clean slate to mount whatever fits your use, whether that is a red dot for close work or a low-power variable scope for stretching the .308 out. The 13-inch M-LOK handguard also gives you room for backup irons if you want them.
What magazines does the DB10 Carbon .308 accept?
It uses SR-25/DPMS pattern magazines, which is the most common .308 AR mag standard on the market. One 20-round Magpul Gen M3 PMAG comes in the box, and spares are affordable and easy to find just about anywhere.



Reviews
There are no reviews yet.