Description
The Magpul Hunter Lite Stock takes everything folks liked about the original Hunter 700 and puts it on a diet. It's a drop-in replacement for Remington 700 and 700-pattern short-action rifles, and the whole idea here is a lighter, slimmer package that's easier to pack up a mountain without giving up the features that make it shoot well. Compared to the original Hunter, it runs roughly 25% lighter with an forend that's about 25% narrower, and it settles in right around 2.4 to 2.5 pounds depending on how you have it spaced out.
What the Hunter Lite Does for Your 700
Underneath the reinforced polymer shell sits an extruded aluminum V-bedding block with steel action screw pillars. That combination locks your action in tight and keeps things from compressing or shifting under recoil, which is what you want for repeatable groups. It free-floats barrels up to a Medium Palma profile, so heavier hunting and light target contours have room to breathe. There's also an integrated AICS-pattern magazine well built right into the stock, meaning you feed from the same detachable short-action mags used all over the precision world, with stamped steel over-insertion tabs so the mag seats the same way every time.
Dialing in the Fit
Length of pull adjusts between 13 and 15 inches using four included spacers, and the snap-on cheek riser gives you up to 3/8 inch of comb height to line up behind your optic. The whole stock is fully ambidextrous. A reversible inlet insert lets you set it up for a right or left-hand action, and the paddle-style magazine release works from either side. The enlarged trigger guard leaves plenty of room for gloved fingers when it's cold out.
Built to Carry and Mount Gear
Five M-LOK slots run along the flat bottom of the forend for a bipod, tripod adapter, or other support gear, and there are integral sling swivel studs front and rear ready for your sling. The Olive Drab Green finish blends into the field nicely, and like the rest of the Magpul lineup, this one's made in the USA and built to shrug off rain, snow, mud, and dust.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG1422-ODG
- UPC: 840815148661
- Model: Hunter Lite (700)
- Fitment: Remington 700 & 700-Pattern Short Action
- Action Type: Bolt Action
- Color: O.D. Green
- Style: Fixed
- Material: Reinforced Polymer with Aluminum V-Bedding Block
- Bedding: Extruded Aluminum V-Block with Steel Pillars
- Weight: Approx. 2.4 – 2.5 lbs
- Length of Pull: 13 – 15 in (four included spacers)
- Comb Adjustment: Up to 3/8 in via snap-on cheek riser
- Magazine Compatibility: AICS-Pattern Short Action
- Accessory Mounting: Five Forend M-LOK Slots
- Max Barrel Profile: Up to Medium Palma
What’s Included
- Magpul Hunter Lite Stock (Remington 700 Short Action, ODG)
- Four length-of-pull spacers
- Snap-on cheek riser
- Reversible inlet insert for right/left-hand configuration
- Integral front and rear sling swivel studs (pre-installed)
- Installation instructions
Frequently Asked Questions
Will the Hunter Lite fit my Remington 700 short action?
Yes, it's built for Remington 700 and 700-pattern short-action rifles. It accepts barrel profiles up to a Medium Palma contour, so factory hunting barrels and most light-to-medium aftermarket barrels drop right in and free-float. If you're running a heavy bull barrel, check your contour against that Medium Palma limit before ordering.
Does the Hunter Lite use detachable magazines?
It does. The stock has an integrated AICS-pattern magazine well with an ambidextrous paddle release, so there's no separate bottom metal to source. Magpul PMAG AC mags and other AICS-spec short-action magazines feed reliably thanks to the stamped steel over-insertion tabs.
Can lefties run the Hunter Lite Stock?
Absolutely. It's fully ambidextrous out of the box. A reversible inlet insert lets you configure it for a left or right-hand action in a few minutes, and the magazine release works from both sides.
How is this different from the original Magpul Hunter 700 Stock?
The Hunter Lite is the trimmed-down version. It's roughly 25% lighter with a forend about 25% narrower, which makes it easier to carry and handle on long hunts. You still get the adjustable comb, adjustable length of pull, aluminum V-bedding block, and M-LOK mounting the Hunter line is known for.




Reviews
There are no reviews yet.