Description
The Radian Afterburner and Ramjet combo is engineered to give you noticeable recoil reduction on the P365XL and P365-XMACRO without the bulk or complexity of a threaded solution. What makes this system work is the pairing of a ported barrel with a precision micro-compensator that work together to manage muzzle rise and keep your sights on target between shots.
Design and Material Quality
Radian built this combo with 416R hardened stainless steel for the Ramjet barrel and hardened stainless for the Afterburner compensator, then finished both with Radianite coating. That coating gives you low friction and high corrosion resistance, so you're not dealing with rust creep or erosion from regular shooting. The fluted barrel design also helps with heat dissipation during range sessions, and there's a loaded chamber indicator cut into the barrel for quick reference.
INTRA-LOK Mounting System
The real innovation here is the INTRA-LOK system. Instead of threading the compensator onto the barrel, Radian uses a tapered locking screw that interfaces with a V-groove on the underside of the barrel. You just slide the compensator over the muzzle, insert the screw, tighten it down, and you're done. The timing is perfect every time because of how the taper locks into that groove. When you need to clean the gun, the barrel slides right out without any tools or hassle.
Performance and Compatibility
This combination increases your overall slide length to match a P365-FUSE profile, so you'll get P365XL holster compatibility while running a system that's still concealed-carry practical. The setup fits the P365XL and P365-XMACRO with 3.7" slides only. If you have an XMACRO COMP (the factory compensated version) or any P365 model with a loaded chamber indicator, this won't work for you.
Key Specifications
- Manufacturer: Radian Weapons
- Model: Afterburner + Ramjet
- Manufacturer Part Number: R0877
- UPC: 810098421089
- Caliber: 9mm
- Barrel Length: 3.7 inches
- Barrel Material: Hardened 416R stainless steel, fluted
- Compensator Material: Hardened stainless steel
- Finish: Radianite coating (black/gray)
- Mounting System: INTRA-LOK taper-lock (threadless)
- Fits: SIG Sauer P365XL and P365-XMACRO (3.7" slide)
- Not Compatible With: P365-XMACRO COMP slides, models with loaded chamber indicator (LCI)
What’s Included
- 1x Ramjet ported pistol barrel
- 1x Afterburner micro-compensator
- 1x INTRA-LOK tapered locking screw
- 1x Torx bit for installation
Frequently Asked Questions
Is the Afterburner + Ramjet difficult to install?
Not at all. You slide the compensator over the barrel muzzle, insert the INTRA-LOK tapered screw into the underside groove, tighten it with the included Torx bit, and you're done. The whole process takes minutes. The tapered design ensures the compensator is perfectly timed every time without relying on thread-locking compounds.
Can I use this combo with my standard P365 or P365X?
No. This R0877 model is designed specifically for the P365XL and P365-XMACRO with 3.7" slides. Radian makes a separate 3.1" version for the standard P365 and P365X. If your P365 has a loaded chamber indicator (LCI) on the slide, neither version will work with it.
What's the advantage of a ported barrel combined with a compensator?
The ported barrel handles some of the recoil mitigation on its own, while the compensator catches gases exiting the muzzle and redirects them to fight muzzle rise. Together they give you more recoil control than either would alone. You'll notice faster shot-to-shot recovery during practice or defensive drills.
How does the Radianite coating benefit this barrel and compensator?
Radianite is a hard coating that provides low friction, high hardness, and excellent corrosion resistance. It protects both components from wear caused by regular shooting and muzzle blast erosion, which is especially important for a compensator that takes repeated gas exposure. It also makes cleaning easier because fouling doesn't stick as readily.







Reviews
There are no reviews yet.