Description
Bergara built its name on barrels that shoot, so it makes sense their first suppressor is designed around accuracy instead of chasing decibel numbers alone. The BTi-30 is a .30 caliber can made from Grade 5 titanium with a 3D printed, helical-fluted body that sheds heat quicker and gives it a look you will not mistake for anything else on the rack. At 6.5 inches long and 12.9 ounces, it hangs off the muzzle without wrecking the balance of a hunting rifle, and it is rated up to .300 Remington Ultra Mag on a 16 inch barrel, so it will run everything from a suppressed .22 trainer to a hard-hitting magnum without complaint.
Two End Caps, Two Personalities
The BTi-30 ships with both a vented and a sealed stainless end cap, and swapping them takes nothing more than a 5/8 inch socket. Run the vented cap when precision matters most. It bleeds off peak pressure in the blast chamber, which means faster recovery between shots, noticeably less gas coming back at your face, and less gunk hitting the bolt. Screw on the sealed cap when you want every bit of sound reduction the can has to give. Bergara claims the design minimizes point of impact shift and can tighten groups up to 25 percent compared to traditional suppressors or a bare muzzle, and that focus on repeatability is exactly what you want from a company obsessed with accuracy.
Mounting the BTi-30 Your Way
The rear of the can uses the industry standard 1.375×24 HUB interface, so you are not locked into anything proprietary. Out of the box you get a 5/8×24 direct thread mount that indexes off the crown of the muzzle rather than the shoulder, which keeps alignment consistent every time you spin it on. Prefer a taper mount or quick detach setup from another brand? Swap it in and go.
Built to Live Outdoors
The Tactical Grey C-Series Cerakote finish is a high temperature coating that shrugs off corrosion and is safe for ultrasonic cleaning, so maintenance after a season of rimfire or dirty range days is simple. Designed and manufactured in the USA, this is a well thought out first can from a brand that knows precision rifles inside and out.
Key Specifications
- Model: BTi-30
- Manufacturer Part Number: BTI-30G
- UPC: 043125930043
- Caliber: .30 Caliber (.22 LR up to .300 RUM)
- Caliber Rating: .300 Rem Ultra Mag with 16" barrel minimum
- Body Material: 3D Printed Grade 5 Titanium
- Mount and End Cap Material: Stainless Steel, Nitride Finish
- Overall Length: 6.5 inches
- Diameter: 1.75 inches
- Weight: 12.9 oz
- Mount Type: HUB Compatible (1.375×24 TPI)
- Included Mount Thread Pitch: 5/8×24 TPI Direct Thread, Muzzle-Indexing
- Finish: C-Series Cerakote, Tactical Grey
- Ultrasonic Cleaner Safe: Yes
- Country of Origin: USA
What’s Included
- Bergara BTi-30 suppressor
- 5/8×24 TPI stainless HUB-compatible direct thread mount
- Vented stainless end cap
- Non-vented (sealed) stainless end cap
Frequently Asked Questions
What calibers can the Bergara BTi-30 handle?
It is rated for everything from .22 LR up to .300 Remington Ultra Mag on a 16 inch or longer barrel. That covers the vast majority of popular hunting and precision cartridges like .308 Win, 6.5 Creedmoor, .300 Win Mag, and 30-30, all through the same can.
What is the difference between the vented and sealed end caps?
The vented cap reduces peak pressure in the blast chamber, which gives you faster recovery between shots, less blowback at your face, and better accuracy potential. The sealed cap traps more gas for maximum sound reduction. Swapping between them takes about a minute with a standard 5/8 inch socket.
Is the BTi-30 compatible with other mounting systems?
Yes. It uses the industry standard 1.375×24 HUB interface, so it works with most direct thread, taper, and quick detach mounts on the market. It ships with a 5/8×24 direct thread mount that indexes off the muzzle crown for consistent alignment.
Does the BTi-30 really improve accuracy?
Bergara engineered it specifically to minimize point of impact shift and states it can tighten groups up to 25 percent versus traditional suppressors or a bare muzzle. The muzzle-indexing mount and vented design both contribute to shot-to-shot consistency, which is where this can separates itself from suppressors built purely for sound reduction.


Reviews
There are no reviews yet.