Description
The XD has been around for over two decades, and for good reason. Springfield Armory's Mod.4 is the fourth generation of that platform, and it's the most dialed-in version yet. The big headline is the factory-milled slide, which is cut right out of the box to accept red dot optics using Springfield's OSP plate system. Plates are sold separately and support popular footprints like the Trijicon RMR, Leupold DeltaPoint Pro, and Docter. If you're not running a dot yet, the steel fiber optic front sight and white dot rear are ready to go until you are.
The frame got meaningful attention in this generation too. The texture is more aggressive at the contact points that actually matter, and the undercut trigger guard combined with an extended beavertail lets you get a higher, more controlled grip. The flat-face trigger delivers a consistent feel from shot to shot with a defined wall and clean break. Slide serrations run front and rear and are noticeably deeper than previous XD generations, giving you a solid purchase during press checks or any wet-condition manipulation.
On the safety side, the XD Mod.4 keeps the passive features the platform is known for: a grip safety that disengages naturally with a proper shooting grip, a tactile loaded chamber indicator that protrudes from the top of the slide when a round is chambered, and a striker status indicator at the rear of the slide for both visual and tactile confirmation. The 4-inch hammer-forged barrel wears a Melonite finish, same as the forged steel slide, which gives both solid corrosion and wear resistance. A MIL-STD-1913 Picatinny rail on the dust cover means lights and lasers are on the table as well.
At 27 ounces unloaded and with an overall length of 7.3 inches, the Mod.4 sits in familiar compact territory. It ships with one 16-round stainless steel magazine, and it's worth noting that existing full-size XD 9mm magazines are also compatible.
Key Specifications
- UPC: 706397003531
- MPN: XDDG9101B-M4
- Caliber: 9mm
- Action: Striker-Fired
- Capacity: 16+1
- Barrel: 4" Hammer-Forged Steel, Melonite Finish, 1:10 Twist
- Slide: Forged Steel, Melonite Finish, Optics-Ready
- Frame: Black Polymer
- Sights: Fiber Optic Front, White Dot Rear (Steel)
- Recoil System: Dual Captive Recoil Spring with Full-Length Guide Rod
- Overall Length: 7.3"
- Height: 5.5"
- Grip Width: 1.2"
- Weight (Unloaded): 27 oz.
- Accessory Rail: MIL-STD-1913 Picatinny
- Color: Black
What’s Included
- Springfield Armory XD Mod.4 OSP 9mm Pistol
- 1 x 16-Round Stainless Steel Magazine
Frequently Asked Questions
Does the XD Mod.4 OSP come with optic mounting plates?
The pistol ships with the slide already milled for an optic, but the mounting plates themselves are sold separately through the Springfield Armory store. Plates are available for popular footprints including the Trijicon RMR, Leupold DeltaPoint Pro, and Docter. The steel iron sights are installed from the factory, so you're fully functional right out of the box while you sort out your optic setup.
Is the XD Mod.4 a good option for concealed carry?
At 27 ounces unloaded with a 4-inch barrel and 7.3-inch overall length, it falls into compact territory, putting it in roughly the same size class as a Glock 19. It's carriable for most people depending on body type and holster choice, though it's more at home as a duty or range pistol than a pocket carry. The passive grip safety is something some carry-focused users specifically appreciate for AIWB setups.
Will my existing XD 9mm magazines work in the Mod.4?
Yes, full-size XD 9mm magazines are compatible with the Mod.4, which is a nice bonus if you're already in the XD ecosystem. The pistol ships with one 16-round stainless steel magazine. Springfield also offers a 10-round version of the pistol for markets where that capacity is required.
What safety features does the XD Mod.4 have?
The Mod.4 uses a system of passive safety features that the XD platform has been built around for years. These include a grip safety that disengages automatically with a proper shooting grip, a tactile loaded chamber indicator on the top of the slide, and a striker status indicator at the rear of the slide that gives you both visual and tactile feedback on the striker's condition. None of these require manual manipulation during the draw.
What is the trigger like on the XD Mod.4?
Springfield redesigned the trigger for the Mod.4 with a flat face profile, which gives a more consistent feel across the width of the trigger shoe during the press. It has a defined wall before the break and releases cleanly without a lot of overtravel. It's a solid factory trigger for a pistol in this segment.
Does the XD Mod.4 OSP have a warranty?
Springfield Armory backs all of their firearms with a lifetime warranty. If you ever run into an issue with the gun, Springfield's customer service has a solid reputation for taking care of their customers. It's good peace of mind on any firearm purchase.





Reviews
There are no reviews yet.