Description
A threaded barrel with nothing on the end of it is just asking for trouble. One bump against a range bench or a little grit worked into the threads and suddenly your suppressor will not seat right. The SilencerCo Thread Protector is the cheap insurance that keeps that from happening. Made from steel with a black finish, it spins onto any 1/2×28 threaded muzzle by hand and covers the threads completely while your can or muzzle device is somewhere else.
Why the SilencerCo 1/2×28 Thread Protector Earns a Spot in Your Range Bag
The 1/2×28 pattern is about as common as it gets. Most US-made 9mm threaded pistol barrels use it, along with 5.56 AR platforms and the bulk of threaded 22 LR barrels out there. That makes this little cap one of those parts you buy once and end up using on half the safe. It weighs about half an ounce, so tossing a spare in the range bag or pistol case costs you nothing. Owners consistently mention the fit being snug and low profile compared to the longer, bulkier protectors that come on some factory barrels, and that it stays put better than a lot of factory caps.
Simple to Install, Easy to Forget It Is There
Installation takes all of five seconds. Start it by hand, make sure it is not cross-threading, and snug it down. That is it. The steel construction shrugs off the knocks and scrapes that come with transport and storage, and the black finish blends right in on most barrels instead of standing out like a bare stainless cap. Whether you are waiting on suppressor paperwork, rotating one can between several hosts, or just hauling a threaded pistol to the range, this keeps the muzzle end of your barrel in the same shape it left the factory. SilencerCo makes this protector in .578×28 as well if you run a threaded 45, but this version covers the 9mm and AR crowd. Sold individually, so grab one for each threaded barrel you own.
Key Specifications
- Manufacturer: SilencerCo
- Manufacturer Part Number: AC1360
- UPC: 817272015553
- Model: Thread Protector
- Thread Pattern: 1/2×28 TPI
- Material: Steel
- Finish: Black
- Caliber Compatibility: 9mm (most US-made threaded barrels)
- Platform: AR-pattern and threaded pistol barrels
- Weight: Approx. 0.5 oz
- Quantity: Sold individually
What’s Included
- One SilencerCo 1/2×28 thread protector
Frequently Asked Questions
Will the SilencerCo 1/2×28 thread protector fit my 9mm pistol barrel?
If your barrel is threaded 1/2×28, yes. That is the standard pitch on most US-made 9mm threaded pistol barrels, including popular aftermarket barrels for Glock, Sig, and Smith & Wesson pistols. Just confirm your barrel's thread pitch before ordering, since some imported 9mm barrels use metric threads instead.
Can I use this thread protector on an AR-15 or a threaded 22 LR barrel?
You can. The 1/2×28 pattern is the standard for 5.56/.223 AR muzzles and the vast majority of threaded 22 LR barrels, so this protector works across all of those platforms. As long as the thread pitch matches, it will thread right on.
Do I need any tools to install the SilencerCo thread protector?
No tools needed. It threads on by hand in a few seconds. Just take a moment to start it straight so you do not cross-thread it, then snug it down. Adding a rubber O-ring behind it is a popular trick if you want extra resistance against it backing off under recoil.
What is the difference between this and the .578×28 version?
Thread pitch is the only difference. This AC1360 model is cut for 1/2×28 barrels, which covers most 9mm and AR-platform muzzles. The .578×28 version is made for larger bores like threaded 45 ACP barrels. Match the protector to whatever pitch your barrel is cut for.





Reviews
There are no reviews yet.