Description
Sometimes the simplest setup is the right one. The YHM HUB Direct Thread Mount takes any suppressor with the industry-standard 1.375×24 HUB thread and converts it to direct-thread mounting on a 1/2×36 barrel, which is the thread pitch you will find on most 9mm AR carbines and pistols. No muzzle device to buy, no proprietary latch to fiddle with. Pull your existing mount out of the back of the can, thread this in with a 3/4 inch open-end wrench, and spin the whole thing onto your barrel. That is the entire process.
Why the YHM 2189-36 Earns a Spot in Your Range Bag
Direct thread has a few real advantages worth mentioning. It keeps the overall package shorter and lighter than most quick-detach systems, there is less hardware between the barrel and the baffles, and there is basically nothing to install wrong. At 1.7 ounces, this mount adds almost no weight to the front of your gun, so a pistol-caliber carbine stays quick handling with the can attached.
Built Like You Would Expect from Yankee Hill
YHM machines this adapter from heat-treated 17-4PH stainless steel and gives it a Melonite QPQ treatment, so it shrugs off carbon, heat, and weather while keeping a low-glare black finish. The generous .45 caliber bore means it clears 9mm with plenty of room to spare, and the wrench flats make removal for cleaning painless even after a long day of shooting.
Broad Compatibility Across HUB Suppressors
Because the 1.375×24 HUB pattern has become the common language of the suppressor world, this mount works with a long list of cans beyond YHM's own Turbo, Resonator, Nitro, and R9 lines. Suppressors like the Dead Air Nomad series, SilencerCo Omega 300, and Hybrid 46 all accept it, along with just about anything else built on a standard HUB rear thread. If you run one can across several hosts, keeping a couple of these adapters in different thread pitches is one of the cheapest ways to make life easier.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-2189-36
- UPC: 841812101864
- Barrel Thread Pitch: 1/2×36
- Suppressor Interface: 1.375×24 (HUB)
- Material: 17-4PH heat-treated stainless steel
- Finish: Melonite QPQ, black
- Weight: 1.7 oz
- Bore Diameter: .45 caliber through-bore
- Installation Tool: 3/4 inch open-end wrench
- Product Type: Suppressor Accessory
What’s Included
- YHM HUB Direct Thread Mount, 1/2×36
Frequently Asked Questions
Which suppressors will the YHM HUB Direct Thread Mount fit?
It fits any suppressor with the industry-standard 1.375×24 HUB rear thread. That covers YHM cans like the Turbo T2, Turbo K, Resonator R2, Nitro N20, and R9, plus popular options from other brands such as the Dead Air Nomad series, SilencerCo Omega 300, and Hybrid 46. If your can accepts HUB mounts, this adapter will thread right in.
What firearms use 1/2×36 threading?
The 1/2×36 pitch is most common on 9mm AR-pattern carbines and pistols, where the coarser thread was adopted to leave more material on the muzzle. Some other pistol-caliber carbines use it as well. Check your barrel's markings or manufacturer specs to confirm before ordering.
How do I install the YHM-2189-36 on my suppressor?
Remove your existing mount or QD module from the rear of the suppressor, then thread this adapter in and snug it with a 3/4 inch open-end wrench. From there the suppressor threads directly onto your barrel like any direct-thread can. It is a quick job with no special tools required.
Can I shoot 9mm through this mount with its .45 caliber bore?
Yes. The through-bore is sized at .45 caliber so the same adapter design works across multiple calibers, and 9mm passes through with generous clearance. Just make sure your suppressor itself is rated for the caliber and host you plan to run.




Reviews
There are no reviews yet.