0
0

Rise Armament RA-1010 Low-Mass BCG .223/5.56 Black Nitride

UPC: 853742008434

$229.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Rise Armament RA-1010 is a low-mass bolt carrier group made to take the edge off felt recoil and help you stay on target between shots. By trimming the reciprocating mass that moves inside your receiver during the firing cycle, it settles the gun down and makes fast strings feel more controlled. The complete assembly weighs in at just under 8.9 ounces, noticeably lighter than a standard full-weight carrier, and it's cut for .223 Rem, 5.56 NATO, and .300 Blackout so it drops right into most AR-15 and M16-pattern builds.

What Goes Into the RA-1010

This isn't a lightweight part that skimps on the important stuff. The carrier is machined from 8620 tool steel and the bolt from 9310 steel, both finished in black nitride to cut friction, shrug off corrosion, and wipe clean with less effort. The gas key is fastened with grade 8 hardware and properly staked so it stays put under hard use, the cam pin is 4140 steel, and the extractor is tool steel that's been shot-peened for better fatigue life than you'll find on comparable mil-spec pieces. Rise also MPI tests and individually inspects each unit before it ships, which is the kind of quality control that matters most on the part doing the heavy lifting in your rifle.

Getting the Most Out of the RA-1010

Because the RA-1010 moves less mass, it plays well with lighter buffers and springs, letting you tune the gun for an even snappier, softer-shooting setup. It's a favorite among 3-Gun and competition builds where quick follow-ups win stages, and it's just as at home in a lightweight range or hunting rifle. If you're running a shorter or less-gassed system, pairing it with an adjustable gas block lets you dial in cycling and keep brass ejecting cleanly around the 3 to 4 o'clock mark.

Made in the USA and finished the way a quality BCG should be, the RA-1010 is a straightforward way to make a good AR shoot better.

Key Specifications

  • Manufacturer: Rise Armament
  • Model: RA-1010
  • Manufacturer Part Number: RA-1010-BLK
  • UPC: 853742008434
  • Caliber: .223 Rem / 5.56 NATO / .300 BLK
  • Type: Low-Mass Complete Bolt Carrier Group
  • Weight: Approx. 8.9 oz
  • Carrier Material: 8620 Tool Steel
  • Bolt Material: 9310 Steel
  • Cam Pin Material: 4140 Steel
  • Finish: Black Nitride
  • Gas Key: Grade 8 fasteners, properly staked
  • Extractor: Tool steel, shot-peened
  • Inspection: MPI tested, individually inspected
  • Platform: AR-15 / M16
  • Country of Origin: USA

What’s Included

  • Rise Armament RA-1010 complete low-mass bolt carrier group (carrier, bolt, cam pin, firing pin, gas key installed)

Frequently Asked Questions

How much lighter is the RA-1010 than a standard BCG?

The complete RA-1010 comes in at right around 8.9 ounces, which is noticeably lighter than a typical full-weight mil-spec carrier that runs closer to 11 to 12 ounces. That reduced reciprocating mass is what softens felt recoil and helps the rifle settle faster between shots. It's a difference you can feel during quick strings of fire.

Will the RA-1010 work with .300 Blackout?

Yes, the RA-1010 is cut for .223 Rem, 5.56 NATO, and .300 Blackout, since all three share the same bolt face and standard AR-15 components. Just keep in mind that a low-mass carrier can be sensitive to gas tuning on certain setups. If you run into cycling quirks on a shorter or subsonic-heavy .300 BLK build, an adjustable gas block or a slightly heavier buffer usually sorts it out.

Do I need a special buffer to run the RA-1010?

Not necessarily. Many builds run the RA-1010 fine with a standard buffer, but because it moves less mass, it also pairs nicely with lighter buffers and springs for an even snappier, softer-shooting feel. If your gun is overgassed, a slightly heavier buffer or an adjustable gas block gives you the room to fine-tune reliable cycling.

Is the RA-1010 quality tested before it ships?

It is. Each RA-1010 is magnetic particle inspected and individually checked before leaving Rise Armament, which catches internal flaws in the components that do the hard work in your rifle. The gas key is also staked with grade 8 hardware to keep it from backing out under repeated firing.

Additional information

UPC

853742008434

Manufacturer

Manufacturer Part Number

RA-1010-BLK

Model

Shipping Weight

0.654

Reviews

There are no reviews yet.

Be the first to review “Rise Armament RA-1010 Low-Mass BCG .223/5.56 Black Nitride”