Description
Breakthrough Clean has built its reputation on gun care gear that just works, and these 3-inch square cotton patches are a solid example. They're made from 100% woven cotton knit, which soaks up solvent and CLP well while leaving very little lint behind in your bore. The 3-inch size is dialed in for 12 and 16 gauge shotguns, giving you enough material to wrap a jag or slotted tip and get full, even contact against the barrel walls.
Why the 3" Square Fits 12 and 16 Gauge Bores
A patch that's too small slides through loose and skips the fouling. Too big and it bunches up or jams at the choke. The 3-inch square hits the sweet spot for a shotgun bore, whether you're pushing a wet patch soaked in solvent to break up plastic wad residue and carbon, or running a dry one to shine things up before oiling. Many folks wrap them around a bronze brush or an o-ring jag for an even snugger fit, and the woven knit holds together well without tearing on the way through.
What You Get in the 300-Pack Tray
This pack comes with 300 patches stacked in a plastic tray, so they stay flat, clean, and easy to grab one at a time. That's a genuine stash of patches, plenty to carry you through a heavy clay season or keep the whole gun cabinet maintained. The tray tucks right into a range bag or onto a bench shelf without patches scattering everywhere.
These are gentle on the bore too, so you're scrubbing out powder residue, oil, and debris without scratching the finish inside your barrel. Pair them with a good shotgun solvent, a rod, and your favorite jag, and you've got the makings of a clean, well-kept shotgun that keeps patterning the way it should for years.
Key Specifications
- Manufacturer: Breakthrough Clean Technologies
- Manufacturer Part Number: BT-CP-S-3-300
- UPC: 854325008100
- Patch Size: 3 in. x 3 in. square
- Gauge Compatibility: 12 and 16 gauge
- Material: 100% woven cotton knit
- Quantity: 300 patches
- Shape: Pre-cut square
- Storage: Plastic tray
- Lint Level: Low-lint
What’s Included
- 300 cotton cleaning patches, 3" x 3"
- Plastic storage tray
Frequently Asked Questions
What gauges do these 3" square patches work with?
These 3-inch patches are sized specifically for 12 and 16 gauge shotgun bores. The larger square gives you enough material to make solid contact with the barrel walls without being so big it bunches up. If you shoot smaller gauges like 20 or 28, you'll want a smaller patch size from the same lineup.
Do these Breakthrough Clean cotton patches leave a lot of lint in the bore?
No, the woven 100% cotton knit is built to keep lint down while still soaking up plenty of solvent. Low-lint patches matter because stray fibers can catch fouling and defeat the point of cleaning. You'll get a clean, dry bore after a final pass or two.
How do I use these patches to clean my shotgun?
Wrap or spike a patch onto a jag or slotted tip, wet it with your favorite shotgun solvent, and push it through the bore from the chamber end toward the muzzle. Follow up with dry patches until they come out clean, then run one lightly oiled patch to protect the barrel. Some folks wrap them around a bronze brush or an o-ring jag for a snugger fit through the choke.
Will 300 patches last a while?
For most shooters, yes. A typical shotgun cleaning uses a handful of patches per barrel, so 300 will carry you through a full season of clay shooting or keep several guns maintained. The tray keeps them flat and organized so you're not digging around for one.



Reviews
There are no reviews yet.