0
0

Area 419 Hellfire 2P Self-Timing Muzzle Brake w/ Adapter 6.5mm/30cal

UPC: 853675008754

$145.00

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Area 419 built the Hellfire 2P for folks who want a brake that just works and gets out of the way. This two-port design is aimed at semi-auto and hunting setups running barrels 20 inches or shorter, where you want serious recoil reduction without a wall of blast coming back at you. The slightly rearward-facing ports strike a nice balance, cutting felt recoil hard while keeping things comfortable behind the trigger. This is the 6.5mm/30cal version, which covers any bullet up to and including .308, so 6.5mm, 7mm, 284, 270 and magnums are all fair game.

What Makes the Hellfire 2P Self-Timing

The headache with most brakes is timing them so the ports line up level. The Hellfire system solves that. You torque the universal adapter onto your muzzle once with a 5/8 inch wrench and it never has to come off. From there the brake and collar thread on left-hand style, you rotate the brake until it's level, push it in to lock onto the taper, then snug the knurled collar down by hand. No tools, no shims, no guessing where the ports end up. The face is engraved with the caliber to mark the top and has a horizontal line to help you get it dead level.

Build Quality and the Modular Hellfire Setup

These are CNC machined in NW Ohio from heat-treated 17-4PH stainless and finished in black nitride, which also makes cleanup easier since carbon wipes off with a bore solvent soak. The brake runs a 1 inch OD with a 1.1 inch collar that meets the 3-Gun limited class standard, and the assembly adds roughly 2 inches to your overall barrel length. Return to zero is one of the strong points here, so pulling the brake and reinstalling it won't move your point of impact.

Where the Hellfire 2P really earns its keep is versatility. That same universal adapter works with Area 419's suppressor mounts, so you can pull the brake and thread on a can with a repeatable zero. Buy one adapter setup and you can move the brake across multiple rifles or jump between brake and suppressor whenever the situation calls for it.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419HF2P-30-5824
  • UPC: 853675008754
  • Caliber: 6.5mm/30cal (up to and including .308)
  • Thread Pitch: 5/8-24
  • Ports: 2-Port
  • Material: Heat-Treated 17-4PH Stainless Steel
  • Finish: Black Nitride
  • Brake OD: 1 inch
  • Collar OD: 1.1 inch (meets 3-Gun limited class)
  • Added Length: Approx. 2 inches to barrel OAL
  • Recommended Barrel Length: 20 inches or less
  • Origin: Made in USA
  • Shipping Weight: 0.32 lb

What’s Included

  • Hellfire 2P Self-Timing Muzzle Brake (6.5mm/30cal)
  • Hellfire Universal Adapter (5/8-24)

Frequently Asked Questions

What calibers does the 6.5mm/30cal Hellfire 2P cover?

This version is bored for any bullet up to and including .308. That means 6.5mm, 7mm, 284, 270 and similar rounds are all covered, and magnums are fine too. Area 419 keeps a single bore for this range because the efficiency difference between exact caliber sizing and the next size up is minimal.

How does the self-timing feature on the Hellfire 2P work?

You torque the universal adapter onto your barrel once with a 5/8 inch wrench and leave it. The brake and collar thread on, you level it, push it onto the taper to lock, then hand-tighten the knurled collar with no tools. The brake won't rotate as you snug the collar, so the ports stay exactly where you want them.

Can I run a suppressor with the Hellfire 2P adapter?

Yes. Area 419's Hellfire suppressor mounts are compatible with the same universal adapter, so you can pull the brake and thread on a can. Owners consistently report a repeatable zero when switching between the brake and their suppressor.

Is the Hellfire 2P easy to keep clean?

The black nitride finish makes maintenance simple since carbon tends to wipe right off after a soak in a carbon cleaner. The best approach is cleaning the brake whenever you clean the barrel, roughly every 200 to 400 rounds, and sooner if you're running 6mm. Staying ahead of buildup keeps the ports clear and installation smooth.

Additional information

UPC

853675008754

Manufacturer

Manufacturer Part Number

419HF2P-30-5824

Shipping Weight

0.32

Reviews

There are no reviews yet.

Be the first to review “Area 419 Hellfire 2P Self-Timing Muzzle Brake w/ Adapter 6.5mm/30cal”