0
0

CMC Goldfinger Single-Stage Curved Trigger AR15/AR10 3.5 lb Gold

UPC: 850040016000

$193.50

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The CMC Goldfinger is a factory-set 3.5 lb single-stage trigger built to take the guesswork out of upgrading your AR. It arrives as a self-contained, one-piece drop-in group, so you're not fiddling with loose springs and pins during install. The curved shoe gives you that familiar, natural finger placement most folks grew up shooting, and the break is glass-smooth with no gritty creep before the hammer drops. If you've been running a stock mil-spec trigger, the difference is night and day the first time you press it.

What Sets the Goldfinger Apart

CMC builds these from 8620 alloy steel and S7 tool steel with machined tolerances of plus or minus .001 inches, and every sear engagement surface gets a proprietary machining process that leaves an ultra-fine finish. That precision is what gives the Goldfinger its clean release and repeatable feel. The 3.5 lb pull is pre-set and non-adjustable, which is a good thing here since it means consistent performance right out of the pack with no tuning required on your end.

Fast Follow-Ups With the Goldfinger

A controlled hammer weight and balance paired with a rocket wire hammer spring keep lock time to a minimum, and the positive reset lets you get back on target quickly for that second shot. It runs reliably with both commercial and military-grade ammo, so whether you're on the clock in a match, chasing coyotes, or just enjoying a range day, it keeps up. The trigger works in mil-spec AR-15 and AR-10 lowers with a small .154 inch pin hole.

The gold Cerakote finish isn't just for show either, though it does look sharp through a stripped lower. Every Goldfinger is hand-assembled and hand-tested at CMC's facility in Fort Worth, Texas before it ships, and the anti-walk pin set keeps everything locked in place over the long haul.

Key Specifications

  • Manufacturer: CMC Triggers
  • Manufacturer Part Number: 91501GF
  • UPC: 850040016000
  • Model: Goldfinger Drop-In
  • Trigger Type: Single-Stage
  • Trigger Shoe: Curved
  • Pull Weight: 3.5 lb (factory pre-set, non-adjustable)
  • Pin Size: Small (.154 in)
  • Fit: Mil-Spec AR-15 and AR-10 Lowers
  • Assembly: Self-Contained One-Piece Drop-In
  • Material: 8620 Alloy Steel and S7 Tool Steel
  • Machined Tolerances: +/- .001 in
  • Finish/Color: Gold Cerakote
  • Hand: Ambidextrous
  • Origin: Made in Texas, USA

What’s Included

  • CMC Goldfinger single-stage drop-in trigger group
  • CMC Anti-Walk Pin Set

Frequently Asked Questions

Will the CMC Goldfinger fit my AR-15 or AR-10?

It's built for mil-spec AR-15 and AR-10 lowers that use a small .154 inch pin hole, which covers the vast majority of ARs out there. If your rifle is a Colt made between 1991 and late 2009, you may have a large pin and this small-pin version won't fit. When in doubt, check your pin diameter before ordering.

Is the 3.5 lb pull weight on the Goldfinger adjustable?

No, the pull is factory pre-set at 3.5 lbs and not user-adjustable. CMC hand-assembles and tests each one so it's dialed in and ready to run right out of the pack. Plenty of owners note it feels even lighter and crisper than the number suggests.

How hard is the Goldfinger to install?

It's about as simple as AR upgrades get. The trigger is a self-contained, one-piece unit that drops into your lower and locks in with the included anti-walk pin set. Most people have it installed in a few minutes with basic tools, and there's no tuning or fitting afterward.

What's the difference between the Goldfinger and a standard CMC drop-in trigger?

The Goldfinger shares CMC's proven single-stage drop-in design and 3.5 lb break, but stands out with its mirror-gold Cerakote finish. It's the same match-grade performance from their reputable trigger line, just with a look that gets noticed. Function-wise you're getting that same crisp break and positive reset CMC is known for.

Additional information

UPC

850040016000

Manufacturer

Manufacturer Part Number

91501GF

Model

Reviews

There are no reviews yet.

Be the first to review “CMC Goldfinger Single-Stage Curved Trigger AR15/AR10 3.5 lb Gold”