Description
A muzzle device that pulls double duty is always a smart buy, and that's exactly what the JK Armament Bald Eagle Compensator delivers. On its own, it's a compact comp that knocks down recoil and muzzle rise on your .45 caliber host with 5/8×24 muzzle threads. Add a JK Quick Attach Taper Mount suppressor to the mix and it becomes your QD mounting point, letting you swap your can between hosts in seconds instead of wrestling with direct thread mounts.
No Timing, No Shims, No Headaches
Thanks to its symmetrical port design, the Bald Eagle doesn't need to be timed. Thread it on, torque it to the recommended 35 ft-lbs, and you're done. No shim kits, no peel washers, no crush washers to fuss with. JK machined wrench flats into both ends to make life easier too, with 3/4 inch flats at the rear and 13/16 inch flats up front, so getting it on and off is about as painless as muzzle device installation gets.
Built to Outlast Your Barrel
This comp is machined from heat-treated 17-4 stainless steel and wears a black nitride finish for wear and corrosion resistance. At just 1.65 inches long, it only adds about an inch to your firearm's overall length, so it won't turn your setup into a boat oar. And here's a detail worth appreciating: when your suppressor is mounted over it, the Bald Eagle works as the initial blast baffle, soaking up the worst of the muzzle blast and extending the service life of your can.
Pairing the Bald Eagle with JK Suppressors
This .45 caliber bore version with 5/8×24 threading is compatible with JK's Quick Attach Taper Mount system, including the 155 series suppressors. If you're running a JK can and want fast, repeatable attachment with the bonus of recoil reduction when shooting unsuppressed, this is the mount to grab. It's a well-thought-out piece of hardware from a company that has built its reputation on suppressor innovation.
Key Specifications
- Manufacturer: JK Armament
- Model: HD Bald Eagle Compensator
- Manufacturer Part Number: JKMDHDBE4524
- UPC: 850038425500
- Bore Diameter: .45 Caliber
- Thread Pitch: 5/8×24 TPI
- Material: Heat-Treated 17-4 Stainless Steel
- Finish: Black Nitride
- Overall Length: 1.65 in
- Added Length When Installed: Approx. 1 in
- Wrench Flats: 3/4 in rear, 13/16 in front
- Timing Required: No
- Recommended Torque: 35 ft-lbs
- Suppressor Compatibility: JK Quick Attach Taper Mount system
What’s Included
- JK Armament HD Bald Eagle Compensator, 45 Cal 5/8×24
Frequently Asked Questions
Does the Bald Eagle Compensator need to be timed during installation?
No, and that's one of its best features. The symmetrical design means there's no top or bottom orientation to worry about, so you skip shims and peel washers entirely. Just thread it on and torque it to the recommended 35 ft-lbs and you're good to go.
Which suppressors work with the JK Bald Eagle Compensator?
It serves as a quick-detach mount for suppressors equipped with the JK Quick Attach Taper Mount, including JK's 155 series cans. When the suppressor is mounted, the comp also functions as the initial blast baffle, which helps extend the life of your suppressor's internals.
Will this fit my rifle?
This version has 5/8×24 threads and a .45 caliber bore, so it fits barrels with 5/8×24 muzzle threading shooting .45 caliber or smaller projectiles. JK makes the Bald Eagle in several thread and bore combinations, so double-check your barrel's thread pitch before ordering.
How much length does the Bald Eagle Compensator add to my firearm?
The comp itself measures 1.65 inches overall, but since part of that threads onto the barrel, it only adds roughly one inch to your firearm's total length. It's one of the more compact QD mounts out there, which is a real plus on shorter builds.




Reviews
There are no reviews yet.