0
0

NCStar MAKMDV2 AK Micro Dot Mount & Rail Receiver Cover Gen 2

UPC: 848754005045

$26.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting glass onto an AKM has always been a bit of a chore, and NCStar's Gen 2 Micro Dot Mount and Rail Receiver Cover tackles it in a clean way. Instead of fussing with side rail brackets or clamp-on setups that shift under recoil, this piece replaces your factory top cover entirely. You end up with a low-profile Picatinny-style rail running the length of the cover plus a dedicated micro dot base at the rear, so you can run a reflex sight or a scope mount right off the top of the gun.

The build is a mix of materials chosen for the job. The receiver cover itself is steel, which gives it the rigidity you want when you're locking down an optic, while the rail is aluminum to keep weight in check. Total weight comes in at 7.3 ounces across its 9.5-inch length, so it doesn't turn your rifle into a nose-heavy club. Three front tabs and two rear set screws pull everything into place for a snug fit that holds zero shot after shot.

What the Gen 2 Micro Dot Mount Does Best

The standout here is that dedicated micro dot base. It's designed to sit an NCStar micro dot at the lowest possible height, low enough to co-witness with your factory AK iron sights. It plays nicely with NCStar micro dot models like the DGAB, DDAB, DDAC, and DDAS, so if you're already in the NCStar ecosystem it drops right in.

Fitment Notes Before You Buy the MAKMDV2

This cover is built for AKM-pattern rifles with a stamped receiver, covering the common 7.62×39, 5.45×39, and .223 chamberings. Like most AK top cover mounts, fit can vary a little from one manufacturer's receiver to the next, so a bit of careful fitting during install is normal. Take your time seating the front tabs and snugging the rear screws, and you'll get a solid, repeatable mount that keeps your dot where you left it.

Key Specifications

  • Manufacturer: NcSTAR
  • Manufacturer Part Number: MAKMDV2
  • UPC: 848754005045
  • Generation: Gen 2
  • Rail Material: Aluminum
  • Receiver Cover Material: Steel
  • Finish: Black
  • Length: 9.5 inches
  • Weight: 7.3 oz
  • Fits: AKM-pattern rifles with stamped receiver (7.62×39, 5.45×39, .223)
  • Rail Type: Low-profile Picatinny / MIL-STD 1913
  • Micro Dot Compatibility: NCStar DGAB, DDAB, DDAC, DDAS
  • Mounting Hardware: Three front tabs, two rear screws

What’s Included

  • NCStar MAKMDV2 AK micro dot mount and rail receiver cover
  • Three front tabs
  • Two rear mounting screws

Frequently Asked Questions

Will the MAKMDV2 fit my AK-47?

It's designed for AKM-pattern rifles built on a stamped receiver, which covers most common 7.62×39, 5.45×39, and .223 AKs. Milled receivers and some non-standard receivers can differ, so double-check that your rifle uses a stamped AKM top cover. As with most AK top cover mounts, plan on a little careful fitting to dial in a tight, wobble-free install.

Can I co-witness a red dot with this AK micro dot mount?

Yes, that's one of the main reasons to grab it. The dedicated micro dot base sits the optic at the lowest possible height so an NCStar micro dot lines up with your factory iron sights. It's built around NCStar micro dot models like the DGAB, DDAB, DDAC, and DDAS.

Does the Gen 2 receiver cover let me mount a regular scope or reflex sight too?

It does. Along with the dedicated micro dot base, the cover has a full-length low-profile rail that accepts standard reflex optics or scope mounts. That gives you flexibility to run a red dot, a compact scope, or a magnifier setup off the top of the receiver.

How does the MAKMDV2 attach to the rifle?

It replaces your existing factory top cover completely rather than clamping onto it. Three front tabs locate the front of the cover and two rear set screws lock down the back for a secure, repeatable fit. Take your time seating everything and it'll hold zero through regular shooting.

Additional information

UPC

848754005045

Manufacturer

Manufacturer Part Number

MAKMDV2

Reviews

There are no reviews yet.

Be the first to review “NCStar MAKMDV2 AK Micro Dot Mount & Rail Receiver Cover Gen 2”