Description
Running a VICTRA-12 on your 870, 1100, or 11-87? This is the piece that ties it all together. The mount assembly threads into your Remington barrel's factory choke threads just like a standard choke tube, giving the suppressor a rock-solid interface without a trip to the gunsmith. And here's the smart part of the whole system: this mount doesn't constrict your shot at all. Pattern control happens up front at the suppressor's end cap, where YHM's choke cone lives. That means you can swap chokes without ever pulling the can off the gun.
Built Like the Rest of the VICTRA-12 System
Yankee Hill machines this mount from 17-4 stainless steel and treats it with a Melonite finish, so it shrugs off carbon, weather, and the general abuse that comes with shotgun life. The whole assembly measures 2.98 inches long with a 1.20 inch diameter, but only adds about .95 inches past the muzzle once installed. Every mount ships with the V-12 Jam Nut, which snugs everything down and keeps the suppressor from walking loose under recoil. Like everything YHM makes, it's produced in the USA.
Which Shotguns Take the Remington Mount
This version is cut specifically for Remington choke threads, commonly known as RemChoke. If your barrel accepts standard Remington screw-in chokes, you're in business. YHM makes separate mount assemblies for Mossberg, Browning Invector, Winchester, Beretta, Benelli, and others, so double check your thread pattern before ordering. Choke systems are not interchangeable between brands, and matching the mount to your barrel is what makes this setup work.
A Simple Upgrade for Suppressed Scattergun Duty
Installation is about as easy as it gets. Thread the mount into the barrel, spin on the jam nut, attach your VICTRA-12, and head to the range. Whether your suppressed shotgun pulls duty on waterfowl, pests, or just weekend clay busting, this mount is the dependable link between your Remington and quieter shooting.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-1252A
- UPC: 841812102922
- Model: VICTRA-12 Mount Assembly
- Compatibility: Remington (RemChoke) threaded barrels
- Gauge: 12 Gauge
- Material: 17-4 Stainless Steel
- Finish: Melonite, Black
- Overall Length: 2.98 in
- Diameter: 1.20 in
- Length Added to Barrel: 0.95 in
- Made In: USA
What’s Included
- VICTRA-12 Remington Mount Assembly
- YHM V-12 Jam Nut (YHM-1250)
Frequently Asked Questions
Does the VICTRA-12 Remington mount work as a choke?
No, and that's by design. This mount threads into your barrel's choke threads purely to attach the suppressor and provides zero constriction to the shot load. Pattern control comes from the choke cone installed in the front cap of the VICTRA-12 suppressor itself, so you can change your pattern without removing the can.
Which Remington shotguns is this mount compatible with?
It fits barrels threaded for the standard Remington choke system, often called RemChoke. That covers most modern 870, 1100, and 11-87 barrels with screw-in chokes. If your barrel is fixed choke or uses a different thread pattern, this mount won't fit, so verify your threads first.
How much length does this mount add to my barrel?
Once installed, the mount adds about .95 inches past the muzzle. The full assembly measures 2.98 inches, but most of that seats inside or against the barrel. It's a minimal footprint considering it's the anchor point for a full-size shotgun suppressor.
What does the included jam nut do?
The V-12 Jam Nut locks the suppressor against the mount so it can't back off under recoil. Shotguns generate a lot of thump, and the jam nut keeps everything torqued and aligned shot after shot. YHM includes one with every VICTRA-12 mount assembly.




Reviews
There are no reviews yet.