0
0

Aim Sports MTM13L308 13.5″ Low M-LOK AR-10 Free Float Handguard

UPC: 815879018274

$89.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Aim Sports MTM13L308 is a 13.5-inch free-float handguard cut for DPMS-pattern AR-10 and .308 builds. It gives your barrel room to breathe by taking weight and pressure off it, which is one of the easiest ways to tighten up groups on a heavier gas gun. The low-profile shape sits slim in the hand, and at right around 10 ounces it doesn't add much heft out toward the muzzle where you feel it most.

What Sets the MTM13L308 Apart

You get seven sides of M-LOK slots running the length of the rail, so lights, bipods, hand stops, sling mounts, and grips all have a spot without cluttering the whole thing up. The top runs a full 1913 Picatinny rail machined to keep it light, giving you a continuous surface for a scope, red dot, or backup irons that lines right up with your upper. Because it's low profile, it clears low-profile gas blocks and keeps the whole package trim.

Fit and Build on the Aim Sports Low M-LOK Rail

This one is made from 6061-T6 aluminum with a black hard coat anodized finish, so it shrugs off wear and holds up to the heat and abuse a .308 puts out. It's built specifically for DPMS low-profile upper receivers, which covers a lot of popular AR-10 platforms out there like the S&W M&P10 and Stag 10. If your rifle runs an Armalite pattern, this isn't the rail for it, so it's worth double-checking your receiver pattern before you order.

Getting the Handguard Installed

Installation is straightforward if you've mounted a free-float rail before: torque the included barrel nut, slide the handguard on, set the anti-rotation index key, and lock down the clamping screws. Aim Sports notes the .308 barrel nut wants a 1-5/16 crow's foot and a torque wrench for proper setup. Backed by an Aim Sports limited lifetime warranty, it's a clean, budget-friendly way to modernize an older AR-10 or finish off a fresh build.

Key Specifications

  • Manufacturer: Aim Sports
  • Manufacturer Part Number: MTM13L308
  • UPC: 815879018274
  • Product Type: Handguard
  • Platform: AR-10 / AR-308
  • Length: 13.5 in
  • Profile: Low Profile
  • Attachment System: M-LOK (seven panels)
  • Top Rail: 1913 Picatinny (MIL-STD-1913)
  • Material: 6061-T6 Aluminum
  • Finish: Black Hard Coat Anodized
  • Mounting Style: Free Float
  • Receiver Compatibility: DPMS Low Profile Pattern
  • Weight: Approx. 10.21 oz
  • Warranty: Aim Sports Limited Lifetime

What’s Included

  • Aim Sports MTM13L308 handguard
  • Steel barrel nut
  • Proprietary steel mounting hardware
  • Anti-rotation index key

Frequently Asked Questions

What rifles does the MTM13L308 handguard fit?

It's built for DPMS low-profile pattern AR-10 and .308 upper receivers, which covers a wide range of common builds including the Smith & Wesson M&P10, Stag 10, and Bear Creek Arsenal AR-10s. It will not fit Armalite-pattern rifles, since those use a different barrel nut and thread. Check your receiver pattern before ordering to make sure you're getting the right rail.

Does the Aim Sports low M-LOK handguard come with a barrel nut?

Yes, the handguard ships with its own steel barrel nut along with the proprietary mounting hardware and anti-rotation key needed to install it. You will need to supply your own tools, as a barrel nut wrench is not included in the package.

What tools do I need to install the MTM13L308?

Aim Sports recommends a 1-5/16 crow's foot used with a torque wrench to properly set the barrel nut. The general process is torque the nut, slide the handguard on, install the anti-rotation index key, then tighten the clamping screws. If you've installed a free-float rail before, it's a quick job.

Will this handguard clear my gas block?

This is a low-profile rail designed to work with low-profile gas blocks, so a standard low-pro block fits inside the tube without trouble. A front sight base or a taller fixed gas block will not clear it, so you'd want a slim gas block for a clean fit.

Additional information

UPC

815879018274

Manufacturer

Manufacturer Part Number

MTM13L308

Product Type

Handguard

Reviews

There are no reviews yet.

Be the first to review “Aim Sports MTM13L308 13.5″ Low M-LOK AR-10 Free Float Handguard”