$59.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Real Avid X3 Driver 57-Piece Gunsmithing Bit Set solves a problem every gun owner runs into eventually: hardware store drivers that almost fit but not quite, leaving you with cammed-out screw heads and a bad afternoon. The heart of this kit is the X3 Driver itself, a single tool that instantly reconfigures into a 72-tooth ratchet, a T-handle for extra leverage and a straight screwdriver for the quick stuff. That means you can crank down a stubborn action screw with the T-handle, then flip to the fine-tooth ratchet to sneak into a tight optic mount without swapping tools.
With 56 bits on board, the coverage runs deep. You get Torx, Phillips, metric hex, standard hex, flat and square profiles, so you can jump between an AR build, a bolt gun, a handgun and a scope install without hunting for the right tip. The bits are machined to fit firearm fasteners properly, seating fully and snugly rather than slopping around the way generic drivers do. There's also a 1/4-inch hex-to-square adapter tucked in, which lets you run sockets when a job calls for them.
The driver handle wears a diamond-knurled grip that does more than look sharp. It keeps you locked in even when your hands are oily or you're working in gloves, and the ratchet mechanism runs smooth with clear directional detents instead of the gritty feel you get from cheaper sets. The compact body and ratcheting thumbwheel are built to work in the confined spaces where firearm work usually happens.
Everything packs into a durable, stackable case that keeps each bit in its place and travels easily between the bench and the range. Whether you're a full-time gunsmith or a weekend tinkerer handling your own maintenance, the X3 57-Piece set gives you a well-rounded toolset for scope rings, trigger jobs, handguard installs, sight work and general assembly.
This set is built for scope ring and mount installs, action screws, trigger jobs, handguard installations and general sight and accessory work. The wide bit range covers Torx, Phillips, hex in both metric and standard, flat and square profiles, so it handles AR builds, bolt guns and handguns alike. It's a solid all-around kit for both routine maintenance and detailed assembly.
The X3 Driver reconfigures on the fly between a 72-tooth ratchet, a T-handle and a straight screwdriver. Use the T-handle for high-torque leverage on stubborn fasteners, the ratchet for fast, precise turns in tight spots, and the screwdriver mode for quick everyday tasks. All three share the same 1/4-inch hex bit interface, so you never have to change tools mid-job.
Yes. The bits are machined to seat fully and snugly in firearm and optic fasteners rather than slopping around loosely the way generic drivers tend to. That tight fit is what keeps you from camming out and rounding off screw heads, which is the main reason people reach for a dedicated gunsmithing set.
You can. The included 1/4-inch hex-to-square adapter lets the X3 Driver interface with socket-based fasteners, so you get some extra versatility beyond the 56 bits. It's handy when a job calls for a socket size the bit set doesn't cover.
| UPC | 813119016004 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AVX3GBS57 |
| Color | Black |
| Length | 10.2500 |
| Model | |
| Product Type | Kit |
You must be logged in to post a review.
Reviews
There are no reviews yet.