Description
Getting torque right on a firearm matters more than most folks realize. Too loose and your scope walks under recoil or your barreled action gets sloppy. Too tight and you crush optic bodies or strip fasteners. The Real Avid Smart-Torq Fixed Limiter takes that whole worry off the table by locking you into a single preset value of 15 in-lb, which is a sweet spot for a lot of scope ring caps and lighter mounting hardware. There's nothing to dial in and nothing to calibrate. You just feel the click and you know you nailed it.
How the Smart-Torq Fixed Limiter Fits Into Your Bench
This limiter is built around a 1/4-inch hex interface, so it drops onto any 1/4-inch driver, ratchet, or T-handle you already run. One end connects to your driver and the opposite end takes standard 1/4-inch bits, so you're not buying into a proprietary system. Turn the fastener until the internal click-style overload clutch trips, and that's your signal the screw is seated to spec. It's about as simple as torque control gets, and the compact size means it disappears into a range bag or bench drawer.
Accuracy You Can Trust From the 15 in-lb Fixed Limiter
Real Avid rates these limiters to within plus or minus 5 percent, which is tight enough for real gunsmithing work like clamping scope rings, snugging optic mounts, and setting action screws. Because the value is fixed at the factory, there's no drift from a dial getting bumped and no second-guessing whether you set it right. That repeatability is the whole point. Every time you grab the 15 in-lb limiter, you get the same result.
Since these are sold individually, this one is a smart way to cover a specific torque value without buying a full kit. Grab the values you use most and build out your lineup as your projects grow. If 15 in-lb is a number you hit often, this belongs in your kit.
Key Specifications
- Model: Smart-Torq
- Torque Rating: 15 in-lb (fixed)
- Accuracy: +/- 5%
- Clutch Type: Click-style overload clutch
- Drive Compatibility: 1/4-inch hex drivers and bits
- Common Uses: Scope rings, mounts, action screws
- Color: Black
- Length: 6.7 in
- Manufacturer: Real Avid
- Manufacturer Part Number: AVSTFL15
- UPC: 813119015847
What’s Included
- Real Avid Smart-Torq Fixed Limiter, 15 in-lb (sold individually)
Frequently Asked Questions
What does the Smart-Torq Fixed Limiter work with?
It's built for a 1/4-inch hex interface, so it fits any 1/4-inch driver, ratchet, or T-handle. One end connects to your driver and the other end accepts standard 1/4-inch bits. You supply the driver and bits, and the limiter handles the torque control.
How do I know when I've hit the right torque?
The limiter uses a click-style overload clutch. As you turn the fastener, the clutch trips with a distinct click the moment you reach 15 in-lb. That tactile feedback is your cue to stop, so there's no reading a dial or watching a gauge.
How accurate is the 15 in-lb Fixed Limiter?
Real Avid rates these fixed limiters to within plus or minus 5 percent of the marked value. Since the setting is locked in at the factory, you don't have to worry about a dial drifting or getting bumped out of spec. Every use gives you the same repeatable result.
Do I need to buy a whole set, or can I get just this value?
This limiter is sold individually, so you can pick up only the 15 in-lb value if that's what your builds call for. Real Avid offers the fixed limiters across a wide range of torque ratings, letting you build out your collection over time. It's a practical way to cover the specs you use most without a full kit.



Reviews
There are no reviews yet.