Description
Anyone who has mounted an optic knows the anxiety of cranking down a ring screw and wondering if you just cracked a scope tube or left it loose enough to lose zero after a few rounds. The Real Avid Smart-Torq Fixed Limiter takes that worry off the table. It's a compact, dedicated 12 in-lb limiter that clicks the instant you hit the rated value, giving you clean, repeatable torque without staring at a dial or fussing with a big lever-style wrench.
How the Smart-Torq 12 in-lb Fixed Limiter Works
Using it couldn't be simpler. You drop the limiter onto any 1/4-inch hex driver, seat your bit, and start tightening. When the screw reaches 12 in-lb, the click-style overload clutch gives you a tactile click and stops adding force, so you physically can't over-torque past spec. There's no calibration, no adjustment knob, and nothing to reset between fasteners. Real Avid rates these limiters to plus or minus 5 percent accuracy, which is right in the sweet spot for delicate optics hardware and smaller action screws.
Where the 12 in-lb Fixed Limiter Earns Its Keep
The 12 in-lb value lands in the lower torque range you'll reach for often on ring caps, some base screws, and lighter fasteners where a heavier setting would risk crushing or stripping. Because it's a fixed setting, you never have to double-check that the tool drifted off its number, which is a real advantage if you're running through a mount and want every screw treated identically. It plays nice with standard 1/4-inch bits, so it slots right into a driver setup you probably already own.
Built for the Bench and the Range Bag
This is part of Real Avid's broader Smart-Torq lineup, sold individually so you can build out only the values you actually use. At roughly 6.7 inches and a hair under two-tenths of a pound, it stows easily in a range bag, an optic mounting kit, or a gunsmithing drawer. It's a smart pickup on its own or as a companion to the adjustable limiter and X3 Driver kits for folks who want the full torque system.
Key Specifications
- Manufacturer: Real Avid
- Model: Smart-Torq
- Manufacturer Part Number: AVSTFL12
- UPC: 813119015830
- Torque Setting: 12 in-lb (fixed)
- Accuracy: +/- 5%
- Clutch Type: Click-style overload clutch
- Drive Compatibility: 1/4" hex drivers and standard bits
- Length: 6.7 in
- Color: Black
- Weight: 0.18 lb
- Product Type: Torque Limiter Tool
What’s Included
- (1) Real Avid Smart-Torq Fixed Limiter, 12 in-lb
Frequently Asked Questions
How do I use the Smart-Torq Fixed Limiter?
Attach the limiter to any 1/4-inch hex driver, seat the correct bit, and tighten your screw. Once you reach 12 in-lb, the click-style clutch clicks and stops applying force so you can't go past spec. There's no dial to set and no calibration to worry about.
Is the 12 in-lb setting adjustable?
No, this is a fixed limiter locked at 12 in-lb, which is exactly why it stays dead consistent trip after trip. If you want a single tool that dials across a range, Real Avid also makes an adjustable Smart-Torq that spans 15 to 65 in-lb in 1 in-lb increments. Many folks run a set of fixed limiters for the values they use most.
How accurate is the Smart-Torq Fixed Limiter?
Real Avid rates these limiters to within plus or minus 5 percent of the marked value. That tolerance is well within the range you want for scope rings, mounts, and smaller action screws where over-tightening can damage sensitive parts.
Do I need a special driver to use it?
No. It's built to work with any standard 1/4-inch hex driver and common bits, so it drops into a setup most people already have on the bench. You just add the correct bit for the fastener you're working on.





Reviews
There are no reviews yet.