$54.99
17 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Three-prong flash hiders have always been great at killing muzzle flash, but plenty of them come with an annoying side effect: that high-pitched ring after every shot. Breek Arms tackled that head on with the Scorch. Each prong is cut to a slightly different length, which breaks up the harmonics and quiets down the ping without giving up any of the flash reduction that makes tine-style devices so effective. The open prongs vent and scatter gas away from your line of sight, and internal threading inside the body helps break up the fireball even further, keeping your sight picture clean when the light gets low.
This is where the Scorch earns its keep beyond basic flash control. It serves as the muzzle-end interface for Breek-LOK 3QD, so any suppressor running a Breek-LOK 3QD HUB mount locks straight onto it. A quick push and twist puts the can on, and the same motion takes it off. No wrenches, no swapping muzzle devices, no re-timing anything between suppressed and unsuppressed shooting. Run it bare when you want a rifle that stays short and light, then snap your suppressor on in seconds when it is time to shoot quiet.
Breek machines the Scorch from 4140 hardened steel and coats it in a corrosion-resistant black nitride finish, so it shrugs off heat, wear, and weather over high round counts. At roughly 2.25 inches long and just over 2 ounces, it adds very little to the front of the barrel. This .30 caliber version threads onto standard 5/8×24 muzzles, making it a natural fit for .308 and 300 Blackout builds, and it ships with a peel washer for simple, clean timing during install. Made in the USA, it is a smart pickup whether you are setting up for suppressor use down the road or just want a flash hider that does its job without announcing itself with a ring.
No, and that is one of its best features. Breek Arms cut each of the three prongs to a slightly different length, which disrupts the harmonics that cause the ringing sound common with tine-style flash hiders. You get the flash reduction of a three-prong design without the chime after every shot.
Absolutely. It works as a standalone flash hider and does that job well, thanks to the open prongs and internal threading that break up muzzle flash. The Breek-LOK 3QD interface is simply there when you are ready to add a compatible suppressor later.
The Scorch is built as the muzzle-side mount for the Breek-LOK 3QD system, so it pairs with suppressors running a Breek-LOK 3QD HUB mount, which fits the common 1.375×24 HUB standard. Attachment is a simple push and twist with no tools, and removal works the same way.
If your barrel has standard 5/8×24 muzzle threads, yes. This .30 caliber version is a direct fit for most .308, 6.5 Creedmoor, and 300 Blackout barrels with that thread pattern. A peel washer comes in the package to help you time the prongs properly during install.
| UPC | 812296031565 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BRK4316 |
| Caliber/Gauge | .30 Caliber |
| Color | Black |
| Model | |
| Product Type | Flash Hider |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.