Description
The Breek Arms Warhammer Mod2 Micro is one of those small parts that quietly makes a big difference in how your AR-15 runs. Swap out that flimsy factory charging handle and you get a real ambidextrous setup with textured latches that let you grab and rack from either side of the rifle. The latches measure 2.40 inches across, just a hair wider than a standard handle, so you get a positive grip whether you're bare-handed or wearing bulky winter gloves.
What Sets the Warhammer Mod2 Micro Apart
The whole thing is machined from 7075-T6 aluminum and given a Type III hardcoat anodized finish in OD Green, so it holds up to the twisting force of one-handed charging without flexing or wearing out. The Micro name comes from the smaller latch profile, which is the real selling point here. Those slimmer latches ride close to the receiver and stay out of the way of your sling, plate carrier, and barricades. If you've ever snagged a big oversized latch on your gear at the wrong moment, you'll appreciate the low-profile approach.
Gas Mitigation Built Into the Mod2 Design
The MOD2 update is where the engineering shows. There are relief cuts machined into the top and bottom of the stem that steer excess gas out to the sides and away from your face. Breek also raised the shelf at the rear to better seal off the back of the upper and catch any gas that tries to blow straight back. If you shoot suppressed or run a gassy setup, this handle noticeably cuts down on that irritating puff in the face that comes with a hot build.
Installation is a straightforward drop-in on any mil-spec AR-15 or M16 upper, no gunsmithing needed. It weighs in under an ounce, so you're not adding any real bulk to the rifle. For the money, it's a smart, no-nonsense upgrade that punches above its weight.
Key Specifications
- Manufacturer: Breek Arms
- Model: Warhammer Mod2 Micro
- Manufacturer Part Number: BRK555RGREEN
- UPC: 812296030902
- Platform Fitment: Mil-Spec AR-15 / M16
- Operation: Ambidextrous
- Material: 7075-T6 Aluminum
- Finish: Type III Hardcoat Anodized, OD Green
- Latch Style: Micro (Low Profile)
- Total Latch Width: 2.40 in
- Weight: Under 1 oz
- Gas Mitigation: Stem relief cuts and raised rear shelf
What’s Included
- Breek Arms Warhammer Mod2 Micro Ambidextrous Charging Handle (OD Green)
Frequently Asked Questions
Will the Warhammer Mod2 Micro fit my AR-15?
Yes, it's designed as a direct drop-in for any mil-spec AR-15 or M16 upper receiver. No gunsmithing or special tools are required to install it. If your rifle takes a standard charging handle, this one will drop right in.
What makes the Micro version different from the standard Warhammer?
The Micro uses smaller, slimmer latches that sit closer to the receiver to reduce snagging on slings, gear, and barricades. The standard Warhammer runs wider set-back latches that work better around large optics. Both share the same 7075-T6 construction and MOD2 gas mitigation features.
Does the Mod2 design really help with gas blowback?
The MOD2 stem has relief cuts on the top and bottom that redirect excess gas out to the sides and away from your face. Breek also raised the rear shelf to seal off the back of the upper. The difference is most noticeable when shooting suppressed or running a gassy build.
Can I work this charging handle with gloves on?
Absolutely. The latch surfaces have textured grooves cut into them for a secure grip, and they're set slightly wider than a standard handle at 2.40 inches. That makes it easy to grab and rack from either side even with bulky gloves.





Reviews
There are no reviews yet.