$279.95
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Midwest Industries CRMHD-308L is the Combat Rail HD taken up a notch for large-frame builds. It's a one-piece, free-float handguard machined from 6061 hardcoat anodized aluminum, and everything about it is built around rigidity. The longer 4140 barrel nut, MI's patented torque plate, and heavy-duty anti-rotation tabs all work together to keep the rail from shifting forward or twisting under hard use. That matters a lot on a .308, where the extra recoil and heat can loosen up a lesser setup over time.
This is the low-profile version, meaning the top rail sits closer to the receiver for a lower, cleaner sight line and minimal point-of-impact shift if you're running night vision or other aiming devices up top. You get seven sides of M-LOK for lights, lasers, hand stops, bipods, and grips, plus an included 5-slot polymer M-LOK rail section for mounting gear at the 12 o'clock position. Two steel anti-rotation QD sockets are built in for a solid, roll-resistant sling attachment point.
One thing worth sorting out before you order: large-frame .308 rifles aren't all cut the same. This handguard is designed for AR-10 pattern uppers, so if you're running a DPMS-pattern receiver, check with your upper's manufacturer on whether you need a high or low-height rail. Installation is straightforward and Midwest includes the barrel nut wrench in the box, which is a nice touch that plenty of other brands skip. Folks running everything from PA-10 receivers to rebarreled Aero uppers have reported clean fitment.
Midwest Industries products are 100% made in the USA and backed by the brand's reputation for quality that holds up in both duty and civilian builds. At roughly 15 inches, this rail covers a good stretch of barrel for a full-length grip and plenty of mounting space, all while keeping the slim, dehorned profile comfortable in the hands.
This handguard is built for AR-10 pattern large-frame uppers. Since .308 AR-type rifles aren't standardized the way AR-15s are, it's smart to confirm your upper's pattern before ordering. If you have a DPMS-pattern receiver, check with the manufacturer on whether you need a high or low-height rail, since this is the low version.
Yes, Midwest includes the barrel nut wrench right in the box, which is something a lot of brands leave out. Install is generally straightforward for anyone comfortable working on their AR. You'll still want the barrel in a vise block and a torque wrench to get the barrel nut set properly.
The low profile sits the top rail closer to the receiver for a lower sight line and minimal point-of-impact shift, which is helpful if you're running night vision or other aiming devices up top. The high version raises the rail height to match receivers with a taller tang. Matching the correct height to your specific upper is the key to a clean rail-to-receiver transition.
You get seven sides of M-LOK coverage running along the handguard for lights, lasers, bipods, grips, and hand stops. It also includes a 5-slot polymer M-LOK rail section for the 12 o'clock position. Two built-in steel anti-rotation QD sockets give you solid sling attachment points that resist rolling.
| UPC | 812102035732 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MICRMHD308L15.0 |
| Color | Black |
| Length | 15'' |
| Product Type | M-LOK |
You must be logged in to post a review.
Reviews
There are no reviews yet.