0
0

Dead Air KeyMo Flash Hider M13x1LH .22 Cal Steyr AUG Mount DA311

UPC: 810128160513

$71.99

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

AUG owners know the struggle. That M13x1LH left-hand thread pattern rules out most of the muzzle devices on the shelf, and quality options are thin. Dead Air took care of that with this KeyMo flash hider, machined specifically for the Steyr AUG's metric left-hand threads and bored for .22 caliber, which covers your 5.56 setup just fine. It pulls double duty too, taming muzzle flash on its own while serving as the mounting foundation for Dead Air's KeyMo suppressor system.

Why the KeyMo Flash Hider Doesn't Ping

Anyone who has run tined flash hiders knows the annoying tuning-fork ring some of them make after every shot. Dead Air designed this one with mass-shifted, equal-length tines that shut that down completely. No ping, no hum, just a flash hider that does its job quietly. It's cut from 4140 heat-treated alloy steel with a black nitride finish, so it shrugs off heat, carbon, and weather without complaint. At 2.70 inches long and right around 4 ounces, it adds minimal bulk to the end of your barrel.

KeyMo Mounting for Your Dead Air Suppressor

The real payoff here is the mounting interface. This flash hider locks in with the Sandman-L, Sandman-S, and Sandman-K, plus KeyMo-equipped Nomad-30 and Primal suppressors, and it even plays nice with the KeyMicro-equipped Wolfman. Thread it onto your AUG, and swapping your can between rifles takes seconds. Dead Air also engineered the interface so your suppressor comes off clean without carbon-locking to the mount, which is a bigger deal than it sounds after a few hundred rounds.

There's a pre-drilled pin and weld hole at the 6 o'clock position if you ever want to make the installation permanent, and Dead Air backs it with their lifetime warranty. For AUG owners running a KeyMo can, this is the missing piece that ties the whole setup together.

Key Specifications

  • Manufacturer: Dead Air Silencers
  • Manufacturer Part Number: DA311
  • UPC: 810128160513
  • Model: KeyMo
  • Thread Pattern: M13x1LH (Steyr AUG)
  • Bore Diameter: .22 Caliber
  • Material: 4140 HT Alloy Steel
  • Finish: Black Nitride
  • Overall Length: 2.70 in
  • Weight: 4.08 oz
  • Mount Type: KeyMo Suppressor Mounting System
  • Pin & Weld Hole: Pre-drilled at 6 o'clock position
  • Warranty: Dead Air Lifetime Warranty

What’s Included

  • Dead Air KeyMo Flash Hider, M13x1LH

Frequently Asked Questions

Which suppressors work with the Dead Air KeyMo flash hider?

This mount is compatible with Dead Air's full Sandman series, including the Sandman-L, Sandman-S, and Sandman-K, along with KeyMo-equipped Nomad-30 and Primal suppressors. It also works with the KeyMicro-equipped Wolfman. If your can has a KeyMo mounting interface, you're good to go.

Will the M13x1LH thread pattern fit my Steyr AUG?

Yes, M13x1LH is the metric left-hand thread pattern found on Steyr AUG barrels, and this flash hider was made specifically for that platform. Just remember it's a left-hand thread, so it tightens counterclockwise. Double-check your barrel threads before ordering since some aftermarket AUG barrels use different patterns.

Does this KeyMo flash hider ring or ping when shooting?

No, and that's one of its standout features. Dead Air uses mass-shifted, equal-length tines specifically engineered to eliminate the tuning-fork ring that plagues a lot of tined flash hiders. You get flash suppression without the annoying after-shot hum.

Can I use this flash hider on a 5.56 rifle even though it says .22 caliber?

Yes. The .22 caliber bore designation covers 5.56 NATO and .223 Remington, which is exactly what most Steyr AUG rifles are chambered in. Dead Air sizes their flash hider bores to match the typical caliber for each thread pitch, and M13x1LH is bored for .22 caliber projectiles.

Additional information

UPC

810128160513

Manufacturer

Manufacturer Part Number

DA311

Caliber/Gauge

.22 Caliber

Model

Shipping Weight

0.254

Thread Pattern

M13x1LH

Reviews

There are no reviews yet.

Be the first to review “Dead Air KeyMo Flash Hider M13x1LH .22 Cal Steyr AUG Mount DA311”