Description
Anyone running a metric-threaded .30 caliber rifle knows the struggle of finding quality muzzle devices in M15x1. Dead Air took care of that with this KeyMount Flash Hider, giving you a proper suppressor mount that pulls double duty as a legit flash hider when you're running the gun uncorked. It's machined from 4140 HT alloy steel and coated in Black Nitride, so corrosion and hard use aren't going to be a problem.
Why the KeyMount Flash Hider Doesn't Ping
A lot of tined flash hiders ring like a tuning fork after every shot. Dead Air solved this with mass-shifted, equal-length tines that dampen that resonance, so all you hear is the shot, not a lingering metallic chime. The design also does a nice job managing carbon buildup at the mounting interface, which means your can comes off when you want it to instead of getting stubborn after a few hundred rounds. There's a pre-drilled pin and weld hole too, handy if you ever need to make the device a permanent part of a shorter barrel.
Suppressor Compatibility Across the Dead Air Lineup
This mount is the foundation of Dead Air's KeyMount system, so it plays well with a wide range of their cans. That includes the Sandman series and Primal directly, the Nomad series with a KeyMo adapter, the Wolfman with a KeyMicro adapter, and the Sierra 5 and Wolverine when set up with the right HUB adapter. The taper and locking design deliver consistent lockup shot after shot, which translates to a repeatable return to zero when you pull the suppressor off and put it back on. It also sits shallow in the blast chamber rather than protruding deep into the baffle stack, which helps spread out erosion and keeps your suppressor performing longer.
Fit and Installation Notes for the M15x1 KeyMount
At 2.7 inches long and roughly a quarter pound, this is a lightweight way to make your rifle suppressor-ready without hanging extra bulk off the muzzle. If your barrel is threaded M15x1, this version is the one you want. Time it up correctly during install and you've got a durable, no-nonsense mount that will outlast most of the rifle parts around it.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: DA304
- UPC: 810128160469
- Model: KeyMo
- Product Type: Flash Hider / Suppressor Mount
- Caliber: .30 Caliber
- Thread Pattern: M15x1
- Material: 4140 HT Alloy Steel
- Finish: Black Nitride
- Color: Black
- Length: 2.7 inches
- Mounting System: Dead Air KeyMount (KeyMo / KeyMicro compatible)
- Pin and Weld Hole: Pre-drilled
- Shipping Weight: 0.25 lb
What’s Included
- Dead Air KeyMount Flash Hider .30 Cal M15x1
Frequently Asked Questions
Which suppressors work with the Dead Air KeyMount Flash Hider?
It's built for Dead Air's KeyMount system, so it works directly with the Sandman series and Primal. The Nomad series attaches with a KeyMo adapter, the Wolfman with a KeyMicro adapter, and HUB-compatible cans like the Sierra 5 and Wolverine can run it with the appropriate HUB adapter.
Does the KeyMount Flash Hider really eliminate the ping sound?
Yes, that's one of its standout features. Traditional tined flash hiders tend to ring after each shot, but Dead Air designed this one with mass-shifted, equal-length tines that dampen that resonance. You get flash suppression without the tuning fork effect.
What rifles use M15x1 muzzle threads?
M15x1 is a metric thread pattern found on certain European-made .30 caliber rifles, including some HK-pattern 7.62 platforms. Double-check your barrel's thread spec before ordering, since Dead Air also makes this same flash hider in 5/8×24 and other common patterns if your rifle uses something different.
Can I use this as a standalone muzzle device without a suppressor?
Absolutely. It functions as a genuine flash hider on its own, so you can run your rifle bare and still get real flash reduction. When you're ready to mount a can, the KeyMount interface is already sitting there waiting.




Reviews
There are no reviews yet.