0
0

Area 419 Hellfire-Ti .40 Cal Self-Timing Muzzle Brake 5/8×24

UPC: 810080183391

$215.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hellfire-Ti is Area 419's answer to hunters who want match-rifle recoil control without hanging a heavy chunk of steel off the muzzle. It's the titanium version of the brake that reshaped how a lot of people think about muzzle devices, and this is the .40 caliber body threaded 5/8×24. The main body is CNC milled in Ohio from Grade 5 6Al-4V titanium and paired with a stainless steel collar, so you get serious weight savings up front where it matters most while keeping the mounting strength you'd want on a rifle you carry all season.

What the Hellfire-Ti Does at the Bench and in the Field

The whole Hellfire family built its name on rearward-facing ports and a progressive upper port geometry that flattens muzzle rise, and the Ti carries that over. The port measures 1.1 inches across, giving it a healthy amount of braking surface, and the first port runs flatter to help knock down some of the blast. Folks running it on bigger cartridges consistently talk about recoil dropping to a fraction of what the bare rifle kicks, which means you can stay on glass and watch your own impacts instead of getting bounced off target.

Sizing the .40 Cal Hellfire-Ti to Your Rifle

This .40 caliber variant is built to clear anything from 30 cal up through the .40 range, so it covers the 338s, 9mm and .357-based rounds, and similar bore diameters. The brake assembly sticks out about 2.5 inches from the thread shoulder and adds roughly 1.9 inches to your barrel's overall length, which is worth measuring against your setup before you order. The finish is a gray titanium anodize that cuts glare and shrugs off weather.

Install and Return to Zero

The self-timing design is the real everyday convenience here. There are no shims, crush washers, or lathe time involved. You thread it on, snug the collar, and the brake indexes itself straight and level. Take it off to clean or swap devices and it returns to the same spot, so your zero holds. It's the kind of five-minute job you can knock out at the kitchen table.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419HFTI-400-5824
  • UPC: 810080183391
  • Caliber: .40 Caliber (covers 30 cal up through .40)
  • Thread Pattern: 5/8×24
  • Main Body Material: Grade 5 6Al-4V Titanium
  • Collar Material: Stainless Steel
  • Finish: Gray Titanium Anodize
  • Port Diameter: 1.1 inches
  • Length Added to Barrel: Approx. 1.9 inches (2.5 inches from thread shoulder)
  • Timing: Self-Timing, no crush washer or shims
  • Made In: Ohio, USA
  • Shipping Weight: 0.301 lbs

What’s Included

  • Area 419 Hellfire-Ti .40 caliber muzzle brake body
  • Stainless steel self-timing collar

Frequently Asked Questions

What calibers does the .40 cal Hellfire-Ti work with?

This variant is sized for bore diameters larger than 30 cal up through .40 caliber, so it handles the 338s, 9mm and .357-based cartridges, and anything in that range. If you're running a .30 cal or smaller rifle you'd want the .30 and under version instead. Matching the brake to your bore keeps the ports clearing your bullets cleanly.

Do I need a gunsmith to install the Hellfire-Ti?

No. The self-timing collar means there are no shims, crush washers, or lathe work involved. As long as your barrel is threaded 5/8×24, you thread the brake on, tighten the collar, and it indexes itself level in a few minutes. If your barrel has a different thread pitch, you'll need the correct Area 419 universal adapter.

Why titanium instead of the standard steel Hellfire?

The titanium body with a stainless collar drops a good chunk of weight off the muzzle compared to the original steel Hellfire, which keeps a hunting rifle feeling balanced and lighter to carry. You still get the same rearward-facing port design and recoil performance the Hellfire line is known for. It's the natural pick for a rig you're packing up the mountain.

Will removing and reinstalling the brake change my zero?

The self-timing system is built for solid return to zero, so pulling the brake off to clean it or swap devices and putting it back on should not shift your point of impact. That repeatability is one of the biggest reasons people move to the Hellfire system. It makes maintenance and device swaps a lot less of a headache.

Additional information

UPC

810080183391

Manufacturer

Manufacturer Part Number

419HFTI-400-5824

Caliber/Gauge

.40 Caliber

Shipping Weight

0.301

Reviews

There are no reviews yet.

Be the first to review “Area 419 Hellfire-Ti .40 Cal Self-Timing Muzzle Brake 5/8×24”