0
0

Area 419 Hellfire Muzzle Brake 338 Black Nitride 5/8-24

UPC: 810080180963

$170.00

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Area 419 built the Hellfire to solve the two things that drive people crazy about muzzle brakes: taming recoil and getting the ports timed right. This 338 version handles anything up to and including .338 caliber, so it works with 338 Win Mag, 338 Lapua, 338 Norma, and 338 Edge builds. It wears a slick Black Nitride finish and comes set up for a 5/8-24 thread pitch, machined right in Ohio.

The standout here is the self-timing system. You torque the universal adapter onto your barrel once and it stays put, then the brake slides on and locks down with a knurled collar. The brake body does not rotate as you tighten, which means you never have to guess where the ports will end up or fuss with shims and crush washers. Take it off to clean, throw it back on, and your zero holds. That return-to-zero consistency is a big reason folks keep coming back to this system.

What the Hellfire 338 Does to Recoil

The rearward-facing ports and proprietary port design are where the recoil reduction lives. In independent side-by-side testing on a 6.5 Creedmoor, the Hellfire posted around 52 percent recoil reduction, edging out one of the most popular brakes on the market by a few percentage points. The port geometry also keeps muzzle rise in check without any top porting, so your reticle stays settled and you can spot your own hits.

Living With the Hellfire System

This brake is part of Area 419's larger modular family, which is a real perk if you run a suppressor. Since the adapter stays on the barrel, you can swap between the brake and a compatible Hellfire suppressor mount without tools. The face is engraved with the caliber to mark the top for orientation, plus a horizontal line to help you level things up. It runs a touch heavier than a bare crush-washer device, but that weight disappears the second you send a round downrange.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419HF-BN-338-5824
  • UPC: 810080180963
  • Caliber Rating: Up to and including .338 (338 Win Mag, 338 Lapua, 338 Norma, 338 Edge)
  • Thread Pitch: 5/8-24
  • Finish: Black Nitride
  • Port Design: 3-port, rearward facing
  • Timing: Self-timing knurled collar, no shims required
  • Tested Recoil Reduction: ~52% (6.5 Creedmoor test rifle)
  • Modular Compatibility: Hellfire system suppressor mounts and adapters
  • Country of Origin: Made in USA (NW Ohio)
  • Shipping Weight: 0.37 lb

What’s Included

  • Area 419 Hellfire 338 muzzle brake body (Black Nitride)
  • One Hellfire universal adapter (5/8-24 thread pitch)

Frequently Asked Questions

What calibers will the Hellfire 338 brake work with?

This brake is rated for any bullet up to and including .338, which covers 338 Win Mag, 338 Lapua, 338 Norma Mag, and 338 Edge. It will also handle smaller calibers just fine if your barrel is threaded 5/8-24. Keep in mind 5/8-24 is the max thread size offered for this 338 version.

Do I need special tools or shims to time the Hellfire?

No shims or crush washers needed. You torque the universal adapter onto the barrel once with a wrench, then the brake slides on and locks with a knurled collar that requires no tools. The brake body does not spin as you tighten, so the ports line up right every time.

Will removing and reinstalling the brake change my zero?

Return to zero on the Hellfire system is excellent, so pulling the brake for cleaning and putting it back on should not require a zero change. Since the adapter stays fixed on the barrel, the brake indexes to the same spot each time. This is one of the main reasons people run the Hellfire system on more than one rifle.

Can I run a suppressor with this Hellfire brake?

Yes, that is one of the big advantages of the Hellfire platform. The adapter that threads onto your barrel is shared across the system, so you can swap between this brake and a compatible Hellfire suppressor mount without tools. Just note that Hellfire and Sidewinder parts are not interchangeable with each other.

Additional information

UPC

810080180963

Manufacturer

Manufacturer Part Number

419HF-BN-338-5824

Shipping Weight

0.37

Reviews

There are no reviews yet.

Be the first to review “Area 419 Hellfire Muzzle Brake 338 Black Nitride 5/8-24”