0
0

Area 419 Hellfire 2P Self-Timing Muzzle Brake, 1/2-28, 30 Cal

UPC: 810080180376

$145.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Area 419 built the Hellfire 2P for folks running semi-autos and hunting rifles with barrels 20 inches or shorter, and it's a smart pick when you want serious recoil reduction without a mess of shims or a crush washer. This one is set up for 1/2-28 threads and covers calibers up to and including .308 (that's the 6.5mm/30cal brake bore), so it plays nicely with a wide range of .30-cal and smaller builds. The two-port layout trims felt recoil and keeps muzzle rise in check while sending less blast back at you than the bigger three and four-port brakes in the lineup.

What Makes the Hellfire 2P Different

The whole system runs on Area 419's self-timing design, and it's the kind of thing you appreciate the first time you install it. You torque the universal adapter onto your barrel once with a 5/8-inch wrench and leave it there for good. From there the brake and collar thread on, you level it by eye, push it onto the taper, and hand-tighten the knurled collar. No tools to time it, no guessing where the ports land, and the brake won't rotate on you while you snug it down.

Swapping the 2P Brake On and Off

Because the adapter stays fixed, pulling the brake for cleaning or switching over to a suppressor mount is quick, and it returns to zero when you put it back on. Owners regularly point out that they can jump between a can and this brake without chasing their zero around, which is a big deal if you run one rifle for a bunch of jobs. The face is engraved with the caliber to mark the top and includes a horizontal line to help you get it level during install.

Fit, Finish, and Upkeep

Everything is CNC-machined in NW Ohio and finished in black nitride, so it looks right on a heavier contour barrel and holds up to the abuse. Like any brake, it wants a little preventative maintenance. Wiping the ports and the adapter taper when you clean the barrel, roughly every 200 to 400 rounds, keeps carbon from building up and messing with your point of impact down the road.

Key Specifications

  • Manufacturer: Area 419
  • Model: Hellfire 2P Self-Timing Muzzle Brake
  • Manufacturer Part Number: 419HF2P-30-1228
  • UPC: 810080180376
  • Thread Pitch: 1/2-28 TPI
  • Caliber Rating: Up to and including .308 (6.5mm/30cal brake bore)
  • Number of Ports: 2
  • Finish: Black Nitride
  • Timing: Self-timing, no tools required
  • Recommended Barrel Length: 20 inches or less
  • Intended Use: Semi-automatic and hunting rifles
  • Country of Origin: Made in USA
  • Shipping Weight: 0.34 lbs

What’s Included

  • Hellfire 2P two-port muzzle brake
  • Self-timing collar
  • Hellfire universal adapter (1/2-28)

Frequently Asked Questions

What calibers does the Hellfire 2P in 1/2-28 work with?

This version uses the 6.5mm/30cal brake bore, so it's rated for calibers up to and including .308. Area 419 keeps two brake bore options for the 2P to simplify things, and the efficiency difference between a caliber-specific bore and the next size up is minimal. As long as your barrel is threaded 1/2-28 and runs .308 or smaller, you're good.

Do I lose my zero when I take the Hellfire 2P off to clean it?

No. The universal adapter torques onto your barrel and stays there permanently, while the brake and collar are what come off. When you reinstall the brake it returns to zero, so cleaning or swapping over to a suppressor mount doesn't cost you a re-zero at the range.

How does the self-timing system on the 2P install?

You torque the universal adapter onto your barrel with a 5/8-inch wrench first, and that piece never has to come back off. Then you left-hand thread the brake and collar assembly on until it's almost snug, rotate the brake level, push it onto the taper until it locks, and hand-tighten the knurled collar. No shims, no crush washer, and no tools needed to time it.

Is the two-port brake quieter than the bigger Hellfire brakes?

The 2P is designed to reduce recoil while keeping shooter comfort in mind, and owners running it against the three and four-port versions note less blast coming back at the shooter position. It still cuts felt recoil noticeably. Like most brakes it's loud at the muzzle, so hearing protection is a must.

Additional information

UPC

810080180376

Manufacturer

Manufacturer Part Number

419HF2P-30-1228

Shipping Weight

0.34

Reviews

There are no reviews yet.

Be the first to review “Area 419 Hellfire 2P Self-Timing Muzzle Brake, 1/2-28, 30 Cal”