Description
The Crimson Trace Laserguard for the Shield Plus gives you a reliable aiming reference without adding unnecessary bulk to your carry gun. It wraps around the trigger guard to maintain the pistol's sleek profile while providing a consistent red dot that shows up well in most lighting conditions.
Instinctive Activation Makes It Second Nature
The standout feature is the Instinctive Activation system. Your laser turns on the moment you grip the pistol naturally, no button pushing required. With a normal firing grip, the pressure against your hand engages the laser. Release your grip and it shuts off. This means faster target acquisition without thinking about activating anything when seconds matter.
Built to Stick Zero and Adjust Easy
It ships pre-sighted at 50 yards from the factory, so you're ready to go right out of the box. The adjustable windage and elevation let you fine-tune it to your point of aim once you get to the range. The included hex tools do double duty as both installation tools and adjustment wrenches. The black matte polymer finish blends with your gun so well it looks like factory equipment.
Runtime and Battery
A single 1/3N lithium battery powers the whole system and runs for approximately four hours of continuous use. The red laser is bright enough to be effective in moderate to low-light conditions, with a dot size of 0.5 inches at 50 feet.
Key Specifications
- Firearm Fit: S&W M&P Shield Plus
- Laser Color: Red
- Mount Type: Trigger Guard
- Dot Size: 0.50 inch at 50 feet
- Battery Type: 1/3N Lithium
- Battery Runtime: Approximately 4 hours
- Activation Type: Instinctive Activation
- Factory Sighting: Pre-sighted at 50 yards
- Finish: Black Matte Polymer
- Adjustment: Windage and Elevation Adjustable
- UPC: 810048570713
- Manufacturer Part Number: 01-3000052
What’s Included
- Crimson Trace Laserguard laser sight
- 1/3N lithium battery
- Installation and adjustment tools
- User manual
Frequently Asked Questions
Does the Laserguard for Shield Plus require a special holster?
The laser module adds some width to your gun, so it may not fit in all Shield Plus holsters designed for the bare pistol. Some holsters are wide enough to accommodate it without issues, but you might want to check with your holster manufacturer or consider a universal-fit holster. Many aftermarket holster companies make versions that work with trigger guard mounted lights and lasers.
Can I adjust the laser after it's mounted?
Yes. The Laserguard ships pre-sighted at 50 yards, but you can adjust both windage and elevation with the included hex tools. You'll want to verify the zero on your first trip to the range and make small adjustments as needed to match your point of aim.
What's the battery situation, and can I replace it myself?
The laser runs on a single 1/3N lithium battery that lasts around four hours of continuous use. You can replace it yourself when it dies. The battery compartment is accessible without any gunsmithing, making battery swaps simple and straightforward.
How does the Instinctive Activation work?
The laser activates when your hand applies pressure to the grip during a normal firing grip, and deactivates when you release. There's no button to think about under stress. If you can pull the trigger, the laser dot will be on your target, which makes it great for fast shooting or low-light situations where you need instant target reference.



Reviews
There are no reviews yet.