0
0

Strike Industries GRIDLOK 416 Full Duty 9″ M-LOK Handguard HK 416

UPC: 793811764710

$311.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Strike Industries GRIDLOK Rail for 416 was built around a simple idea: your rail should keep up with the mission instead of slowing you down. This Full Duty 9" version mounts directly onto the factory HK OEM barrel nut, which means you can pull your standard HK rail and drop this one on without a full teardown. It's aimed squarely at folks running the HK416, MR556, and M27 IAR platforms who want a faster, more configurable setup.

The heart of the system is the patent-pending Quick Rail Detach GRIDLOK locking latch. A push and pull of the latch and the handguard comes off in seconds, which makes life a lot easier when you need to reach an adjustable gas block or thread on a suppressor. That same speed lets you run one rail as your primary and keep a second GRIDLOK set up for a completely different job, going from a light, night-vision-friendly CQB build to a bipod-ready marksman rig without swapping rifles.

What Sets the GRIDLOK 416 Full Duty Apart

The Full Duty designation refers to the full-length top 1913 Picatinny rail running the length of the handguard, giving you a continuous mounting surface for optics, night vision, and backup irons. Speaking of which, there's a flip-up backup iron sight built right into the front. M-LOK slots at the 3, 6, and 9 o'clock positions handle your lights, lasers, and grips, and four 360-degree free-swivel QD sockets sit at the rear at the 2, 4, 8, and 10 o'clock spots for sling attachment.

Fit, Build, and Suppressor Room on the GRIDLOK 416

Machined from 6061-T6 aluminum, it strikes a good balance between strength and weight in a compact 9-inch, 1.57-inch diameter package. That inner diameter also leaves clearance for suppressors up to 1.57 inches, so tucked cans and SI muzzle devices fit without a fight. One thing worth flagging before you order: this version is not compatible with older HK416 models that use ambidextrous sling attachment points, so confirm your setup first.

Key Specifications

  • Manufacturer: Strike Industries
  • Manufacturer Part Number: GRIDLOK416FD9
  • UPC: 793811764710
  • Length: 9 inches
  • Diameter: 1.57 inches
  • Material: 6061-T6 Aluminum
  • Finish: Black
  • Attachment Interface: M-LOK at 3, 6, and 9 o'clock
  • Top Rail: Full-length 1913 Picatinny
  • QD Sockets: Four 360-degree free-swivel at 2, 4, 8, and 10 o'clock
  • Backup Sight: Integrated flip-up front BUIS
  • Mounting: Factory HK OEM barrel nut
  • Suppressor Clearance: Up to 1.57 inches
  • Compatibility: HK 416, HK MR556, M27 IAR
  • Design: One-piece free-float

What’s Included

  • GRIDLOK Rail for 416 (fully assembled)
  • Locking lever tool

Frequently Asked Questions

Does the GRIDLOK 416 Full Duty handguard require a special barrel nut to install?

No, that's part of the appeal. It mounts directly on your factory HK OEM barrel nut, so there's no proprietary hardware to buy or wrench work required. The Quick Rail Detach latch lets you get it on and off in seconds.

Will this GRIDLOK handguard fit my HK416 or M27 IAR?

It's designed for the HK416, HK MR556, and M27 IAR platforms. One important exception: it is not compatible with older HK416 models that have ambidextrous sling attachment points, so check which style your rifle uses before ordering.

What's the difference between the Full Duty and Lightspeed versions?

The Full Duty features a full-length top 1913 Picatinny rail, while the Lightspeed only has Picatinny sections at the front and rear. Go with the Full Duty if you want a continuous top rail for optics, night vision, and backup irons.

Can I run a suppressor with the GRIDLOK 416 handguard?

Yes. The front is cut to clear suppressors up to 1.57 inches in diameter, and it works well with SI muzzle devices including the OPPRESSOR line for a tucked look. The quick-detach design also makes threading a can on and off much easier.

Additional information

UPC

793811764710

Manufacturer

Manufacturer Part Number

GRIDLOK416FD9

Reviews

There are no reviews yet.

Be the first to review “Strike Industries GRIDLOK 416 Full Duty 9″ M-LOK Handguard HK 416”