0
0

Strike Industries GridLok Lite 17in M-LOK Handguard – Red AR-15

UPC: 793811764307

$254.95

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Strike Industries GridLok Lite takes what made the original GridLok stand out and trims it down into a lighter, more approachable one-piece rail. At 17 inches, it gives you a long, uninterrupted top rail and plenty of real estate for accessories, all while keeping the whole assembly at roughly 1 lb 2.6 oz including the barrel nut. It's machined from 6061-T6 aluminum with a 7000-series barrel nut, so you're getting strength where it counts without dragging your rifle's balance forward.

What Sets the GridLok Lite Apart

The headline feature is the patent-pending Quick Rail Detach system. A simple push and pull of the QD latch and the rail comes off in seconds, no armorer's tools required. That's a huge time-saver if you run an adjustable gas block or swap a suppressor on and off, since you can get to the gas system without breaking down the front end. On this version the latch has a redesigned locking button for earlier engagement, which makes buttoning it back up feel more positive.

Building Around the GridLok Lite

The rail uses the M-LOK system at the 3, 6, and 9 o'clock positions, so lights, lasers, bipods, and grips all mount up easily. Up front there's an integrated flip-up backup iron sight, giving you a fallback aiming option without buying and installing a separate front sight. At the rear you'll find a 360-degree free-swivel QD socket ready for a two-point sling. The front of the handguard is cut to clear suppressors up to 1.57 inches in diameter and all Strike Industries muzzle devices, including the Oppressor, for that tucked look. Inside, the diameter necks down to 1.42 inches about three inches back from the front.

Fit and Setup on the GridLok Lite

Installation is straightforward on a mil-spec M4 upper, with barrel nut torque spec'd at 30 to 50 ft-lbs. Rear tabs with set screws help center the top rail to the receiver for clean alignment. One thing worth knowing up front: set the two base locking screws before you mount the assembly on the barrel nut, since that's the easiest time to dial in the tension. The red anodized finish is smooth to the touch and adds a genuine pop of color to a build.

Key Specifications

  • Manufacturer: Strike Industries
  • Manufacturer Part Number: GRIDLOKLITE17RED
  • UPC: 793811764307
  • Model: GridLok Lite
  • Length: 17 inches
  • Platform: AR-15 / Mil-Spec M4 upper
  • Mounting System: M-LOK at 3, 6, and 9 o'clock
  • Top Rail: Picatinny
  • Material: 6061-T6 aluminum handguard, 7000-series aluminum barrel nut
  • Finish: Red anodized
  • Weight (with barrel nut): 1 lb 2.6 oz
  • Outer Diameter: 1.57 inches
  • Inner Diameter: Up to 1.57 in, necks to 1.42 in after 3 in from front
  • Width: 1.76 inches
  • Height: 2.15 inches
  • Barrel Nut Torque: 30-50 ft-lbs

What’s Included

  • GridLok Lite 17in handguard (one-piece)
  • Barrel nut
  • Integrated flip-up backup iron sight
  • Integrated QD sling socket
  • Mounting hardware

Frequently Asked Questions

What makes the GridLok Lite different from the standard GridLok?

The GridLok Lite is a one-piece design built to cut weight and cost compared to the original GridLok, while carrying over the same patent-pending Quick Rail Detach system. You still get the tool-free rail removal and integrated flip-up front sight, just in a more streamlined package. It's a solid pick if you liked the concept of the GridLok but wanted something a bit lighter on the rifle and the wallet.

Can I really remove the GridLok Lite without any tools?

Yes. The Quick Rail Detach system lets you push and pull the QD latch to pop the rail off in seconds, no wrenches or armorer's tools needed. This makes it easy to reach an adjustable gas block or install and remove a suppressor in the field or at the bench. The redesigned locking button on this version helps the latch engage earlier for a more secure lock-up.

Will the GridLok Lite fit a suppressor?

The front of the handguard is cut to clear suppressors up to 1.57 inches in diameter, along with all Strike Industries muzzle devices including the Oppressor. Keep in mind the inner diameter necks down to 1.42 inches roughly three inches back from the front, so measure your can's dimensions before committing to a fully tucked setup. It's a good match for shorter, slim-profile suppressors on a tucked build.

Does the GridLok Lite include a front sight and sling mount?

It does. A flip-up backup iron sight is built into the front of the handguard, so you have a fallback aiming option without buying a separate front sight. There's also an integrated 360-degree free-swivel QD socket at the rear that's ready for a two-point sling.

Additional information

UPC

793811764307

Manufacturer

Manufacturer Part Number

GRIDLOKLITE17RED

Reviews

There are no reviews yet.

Be the first to review “Strike Industries GridLok Lite 17in M-LOK Handguard – Red AR-15”