Description
This is the same radial-port brake Ruger bolts onto its factory rifles, and now you can add it to your own setup. The radial port design vents gas out to the sides as the bullet clears the muzzle, which cuts down on felt recoil and keeps the muzzle from jumping between shots. On a cartridge like .350 Legend that already has a mild kick, that means a soft, controlled push and faster follow-ups when you need a second round on target.
What Sets the Ruger Radial Port Brake Apart
Built in the USA from 4140 chrome-moly steel, this brake is made to take a beating. The black oxide finish adds a layer of corrosion protection and gives it a clean, low-profile look that blends with just about any barrel, though it looks especially sharp against a stainless one. It measures 1.75 inches long with a slim 0.8-inch diameter and tips the scale at just 2 ounces, so it won't throw off the balance of your rifle up front.
Fitment for the Ruger Radial Muzzle Brake
The brake uses a standard 1/2"x28 thread pattern, so it fits .350 Legend rifles like the AR-556 MPR and the Ruger American Rifle Ranch, along with the PC Carbine chambered in 9mm. If your barrel is threaded 1/2"x28, it'll thread right on regardless of barrel length. Worth noting that many larger rifle calibers use a 5/8"x24 thread, so double-check your muzzle threads before ordering.
Getting the Ruger Brake Installed
Installation is about as simple as it gets. Clean your threads, spin the brake on, and snug it down with a 3/4-inch open-end or crescent wrench torqued to 15 to 20 ft-lbs. No crush washer and no timing required, which takes the guesswork out of the job. One tip from folks who've run this brake: hit the range and re-confirm your zero afterward, since adding a muzzle device can shift point of impact.
Key Specifications
- Manufacturer: Ruger / Sturm, Ruger & Co.
- Model: Radial Port Muzzle Brake
- Manufacturer Part Number: 90699
- UPC: 736676906994
- Caliber: .35 Cal (.350 Legend)
- Thread Pattern: 1/2"x28 tpi
- Material: 4140 Chrome-Moly Steel
- Finish: Black Oxide
- Color: Black
- Style: Radial Ported
- Length: 1.75"
- Diameter: 0.8"
- Weight: 2 oz
- Country of Origin: Made in USA
- Units per Box: 1
What’s Included
- Ruger Radial Port Muzzle Brake (1)
Frequently Asked Questions
What rifles does the Ruger Radial Port Muzzle Brake fit?
Any rifle with a 1/2"x28 threaded muzzle will accept this brake. Ruger designed it for .350 Legend platforms including the AR-556 MPR and the American Rifle Ranch, and it also works on the PC Carbine chambered in 9mm. Barrel length doesn't matter as long as the threads match.
Do I need a crush washer or timing to install this brake?
No. This brake requires no crush washer and no timing, which makes it one of the simpler muzzle devices to mount. Just clean the threads, thread it on, and torque it to 15 to 20 ft-lbs with a 3/4-inch open-end or crescent wrench.
Will this brake really reduce recoil on a .350 Legend?
Yes. The radial-port design vents gas outward to soften felt recoil and hold the muzzle steady between shots. Reviewers and testers running it on .350 Legend rifles describe the recoil as a soft, easy-to-manage push, which is great for newer or younger shooters and for quick follow-up shots.
Should I re-check my zero after installing the Ruger brake?
Absolutely. Adding any muzzle device can shift your point of impact, and users have noted this brake affected their trajectory. Plan a trip to the range after installation to confirm your zero before heading afield.





Reviews
There are no reviews yet.