Description
Older Officer's sized 1911s were built long before accessory rails were a thing, which leaves you with nowhere to hang a light or laser. The Recover Innovations CC3C-03 fixes that in the simplest way possible. It replaces your existing grip panels with a molded green polymer grip that carries an integrated MIL-STD-1913 Picatinny rail up front, so you can mount most weapon lights and lasers on a pistol that never had a spot for them.
Getting the CC3C-03 On Your 1911
Installation is about as painless as it gets. You unscrew your factory grips, screw the new grip and rail system into place using the existing grip hardware, then snug the rail down with the supplied hex hardware. The whole job runs about three minutes at the kitchen table, no gunsmith required, and it leaves no permanent marks on your frame. If you ever want your original look back, it comes off just as fast and your pistol is exactly as it was.
What the Green Polymer Build Brings to the Table
Recover molds the CC3C-03 from high-grade, glass-reinforced polymer, the same kind of material a lot of firearm makers trust for frames and grips. It keeps the whole unit light at roughly 60 grams while standing up to real range use. The green finish gives a tired 1911 a fresh, modern face, and the wraparound ergonomic shape fills the hand better than flat panels for steadier control and recoil management.
A Few Things Worth Knowing About the CC3C-03
This one is made specifically for compact, Officer's sized single stack 1911s. It is not meant for full size, double stack, sub-compact, micro, or Defender frames, so measure your pistol if you are unsure. A nice touch is that it stays field strip compatible, meaning you can break the gun down for cleaning without pulling the grips off. It also plays well with Recover's HC11 holsters and is backed by a lifetime warranty. Designed by Israeli weapons engineer Tamir Porat and made in Israel, it has earned a reputation as one of the more stable rail add-ons out there.
Key Specifications
- Manufacturer: Recover Innovations
- Manufacturer Part Number: CC3C03
- Model: CC3C-03
- UPC: 7290018561713
- Color: Green
- Material: Glass-reinforced polymer
- Rail Type: MIL-STD-1913 Picatinny (20mm)
- Weight: 60g
- Fits: Compact / Officer's sized single stack 1911
- Field Strip Compatible: Yes
- Holster Compatible: Recover HC11
- Country of Origin: Israel
- Warranty: Lifetime
What’s Included
- Recover CC3C-03 grip and rail system (green polymer)
- Rail mounting hardware
- Hex key for installation
Frequently Asked Questions
Will the CC3C-03 fit my 1911?
It is designed for compact, Officer's sized single stack 1911 pistols only. It will not fit full size, double stack, sub-compact, micro, or Defender models. If you are on the fence, measure the grip and rail area against Recover's fitment points before ordering, since it is also listed as Commander compatible.
Do I need a gunsmith to install the Recover CC3C-03?
No. You simply remove your factory grip panels, install the grip and rail system with your existing grip hardware, then tighten the rail with the included hex hardware. Most people finish in about three minutes with no permanent modifications to the gun.
Can I still field strip my pistol with the grip and rail system installed?
Yes. The CC3C-03 is field strip compatible, so you can break your 1911 down for cleaning and maintenance without removing the grip. That saves you from reinstalling it every time you clean.
What can I mount on the CC3C-03 rail?
The integrated MIL-STD-1913 Picatinny rail accepts most common weapon lights and lasers sized for pistols. It gives your compact 1911 a stable mounting point it never had from the factory. Check the length of the accessory against the compact rail before buying to be sure it clears.




Reviews
There are no reviews yet.